R-201 (serv.man6) - Sharp Home Appliance User Guide / Operation Manual. Page 7

Read Sharp R-201 (serv.man6) User Guide / Operation Manual online

INSTALLATION
MICROWAVE POWER LEVELS
5
BUILDING-IN-KIT.
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the house
wiring to overheat and catch fire.
• If the power supply cord of this appliance is
damaged, it must be replaced by a special cord. 
The exchange must be made by an authorised
SHARP service agent.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.
• When removing the plug from the socket always
grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.
• The product is fitted with a re-wireable plug. Should
it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 14.
If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician. 
WARNING 
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in “To replace the mains plug” on page 14.
.
There are 5 microwave power levels, listed below with
the percentage power they represent:
HIGH 100%
800W
MEDIUM HIGH
70%
560W
MEDIUM
50%
400W
MEDIUM LOW
30%
240W
LOW
10%
80W
The microwave power level is varied by the
microwave energy switching on and off. When using
power levels other than HIGH (100%) you will be
able to hear the microwave energy pulsing on and off
as the food cooks or defrosts.
MED LOW
DEFR
DEFROST
OST
COOK
COOK
MED
COOKING CONTROL
WITH COOK & DEFROST GUIDE
MED HIGH
HIGH
LOW
For example, the cooking control is set at MED
HIGH 
(MEDIUM HIGH), 70% microwave power level.
R-201M
R-202M
R-202M/R-201M  O/M&C/B  9/1/01  2:27 pm  Page 5
Page of 36
Display

Click on the first or last page to see other R-201 (serv.man6) service manuals if exist.