Read Sharp R-201 (serv.man4) Service Manual online
R-201M - 8
WARNING FOR WIRING
RE-WIRING
Ensure the following:
1. Wires must not touch:
a) High voltage parts.
(Magnetron, high voltage transformer,high voltage capacitor and high voltage rectifier assembly)
b) Parts that become hot.
(Heating elements, oven lamp,oven cavity magnetron and high voltage transformer)
c) Sharp edges.
(Bottom plates, oven cavity, waveguide flange, chassis support and other metallic parts)
d) Movable parts.
(Fan blade, any motor, switch, switch lever and open button)
(Magnetron, high voltage transformer,high voltage capacitor and high voltage rectifier assembly)
b) Parts that become hot.
(Heating elements, oven lamp,oven cavity magnetron and high voltage transformer)
c) Sharp edges.
(Bottom plates, oven cavity, waveguide flange, chassis support and other metallic parts)
d) Movable parts.
(Fan blade, any motor, switch, switch lever and open button)
2. Positive lock connectors are fitted correctly.
3. Wires are connected correctly as per pictoral diagram.
4. No wire leads are trapped by the outer wrap.
3. Wires are connected correctly as per pictoral diagram.
4. No wire leads are trapped by the outer wrap.
WARNING: WIRING/RE-WIRING
Before carrying out any work; carry out 3D checks.
1. Disconnect the supply.
2. Door opened, and wedged open.
3. Discharge the high voltage capacitor.
Before carrying out any work; carry out 3D checks.
1. Disconnect the supply.
2. Door opened, and wedged open.
3. Discharge the high voltage capacitor.
WIRING / RE-WIRING
R-201M S/MANUAL
13/2/01, 2:53 pm
8
Click on the first or last page to see other R-201 (serv.man4) service manuals if exist.