R-1900M (serv.man14) - Sharp Home Appliance User Guide / Operation Manual. Page 12

11

You can check your oven settings and customize your oven 
by changing Custom Setting settings.

The CUSTOM SETTING pad has 11 operations. 
  1. Selecting Memory Input Method
  2. Selecting Auto Start Operation
  3. Program Lock Setting
  4. Audible Signal Sound Volume Setting
  5. Cooking Completion Signal Setting  
 6. 

Memory 

Check

 7. 

Counter 

Check/Clear

  8. Air Intake Filter Counter
  9. Selecting Operation in case of Magnetron Failure
 10. Multiplication Factors for Double/Triple  Quantity
 11. Express Defrost Setting 

To use Custom Setting Function, press the CUSTOM SETTING 
pad twice within 2 seconds, and desired option pads. See 
detailed instructions below.

NOTE : You will hear an audible signal the second time the 
CUSTOM SETTING pad is pressed to indicate that you have 
entered Custom Setting.

1.  Selecting Memory Input Method
Your oven has 3 ways to select memory numbers.

CH11 : Dual Digit Input (100 memory banks) 

= Factory  Setting

CH12  :  Single Digit Input (10 memory banks) 
CH13  :  Repeat Digit Input (30 memory banks)

To set Input Method
Press the CUSTOM SETTING pad twice within 2 seconds then 
enter the numbers

1,1 for Dual Digit Input
1,2 for Single Digit Input
1,3 for Repeat Digit Input

Press the START pad to save settings and the STOP/CLEAR 
pad to exit from the Custom Setting Function.  

*  Suppose you want to set Repeat Digit Input.

x 2

1  Press the CUSTOM SETTING pad 

twice within 2 seconds.

2  Enter 1,3 for Repeat Digit Input.

3  Press the START pad to save the 

setting.

4

 

Press the STOP/CLEAR pad to 
exit from the Custom Setting 
Function.

1

3

2.  Selecting Auto Start Operation
Your oven has 2 ways to start memory cooking.

CH21  :  Auto Start OFF = Factory Setting
CH22  :  Auto Start ON 

The factory setting is Auto Start OFF. Under Auto Start OFF, 
cooking will not begin until the START pad is pressed. Under 
Auto Start ON, cooking will automatically start after the 
memory number is input. 

To set AUTO START
Press the CUSTOM SETTING pad twice within 2 seconds then 
enter the numbers 

2, 1 for Auto Start OFF
2, 2 for Auto Start ON

Press the START pad to save settings  and  the STOP/CLEAR 
pad to exit from the Custom Setting Function.

*  Suppose you want to set Auto Start ON.

x 2

1  Press the CUSTOM SETTING pad 

twice within 2 seconds.

2  Enter 2, 2 for Auto Start ON.

3  Press the START pad to save the 

setting.

4

 

Press the STOP/CLEAR pad to 
exit from the Custom Setting 
Function.

3.  Program Lock Setting 
You can select Program Lock  ON or OFF

CH31  :  Program Lock OFF = Factory Setting
CH32  :  Program Lock ON

Program Lock OFF is the Factory setting. Program Lock 
prevents accidental changes to settings. When the CUSTOM 
SETTING pad is pressed twice within 2 seconds in program 
Lock ON, the LOCK indicator will light up. Turn Program Lock 
OFF when you want to change the settings.

To turn Program Lock ON/OFF  
Press the CUSTOM SETTING pad twice within 2 seconds then 
enter the numbers

3, 1 for Program Lock OFF
3, 2 for Program Lock ON

Press the START pad to save settings and  the STOP/CLEAR 
pad to exit from the Custom Setting Function.

2

2

R-1900M [EN].indd   Sec1:11

R-1900M [EN].indd   Sec1:11

9/9/08   2:37:19 PM

9/9/08   2:37:19 PM