Read Sharp VENTA (serv.man9) Service Manual online
Venta System Maintenance
V1.0
Page 6 of 9
July 2002 Sharp Electronics (UK) Ltd.
1.5
Loading Venta Software onto the UP-5900 with Windows 98
There are 2 way of loading the Venta Software from the CD supplied by Sharp (UK)
•
Via the network through the laptops CD ROM drive
•
Direct CD ROM drive attached via the USB port on the UP-5900 itself.
Note: This documentation will follow the USB route as the Network route is equally as easy.
1. Connect the USB CD Drive.
2. Load the driver which comes as standard with the CD Drive.
3. Make sure the operating system will see the new USB CD Drive by going into Windows
2. Load the driver which comes as standard with the CD Drive.
3. Make sure the operating system will see the new USB CD Drive by going into Windows
Explorer and look for Drive E:
4. Place the VENTA Install CD-ROM in the USB CD Drive.
5. Go to the directory “VENTA APPLICATION”
6. Double click on “SETUP2001.EXE”
7. You will see the following screen.
5. Go to the directory “VENTA APPLICATION”
6. Double click on “SETUP2001.EXE”
7. You will see the following screen.
8. At this point you have the ability to install 3 scenarios.
•
Install with empty data files. – Loads Venta as a BLANK application to allow
programming.
programming.
•
Install with sample data files. – Loads Venta as a DEMONSTRATION application.
•
Install without data. – Loads Venta Application UPGRADES following future development,
this does not affect any data.
this does not affect any data.
Click on the first or last page to see other VENTA (serv.man9) service manuals if exist.