VENTA (serv.man6). Supplementary File Maintenance Operation Manual 2 - December 2004 - Sharp EPOS Service Manual (repair manual). Page 18

                                                                           Sharp Venta Maintenance & Operation Manual – 2 (Ver 1.3.003) 

18

 

 
To realise this function two changes have been made. The introduction of a new 

function (Function 86 – Shift), this allows shifts to be changed in trading (i.e 

Breakfast, Dinner, Afternoon etc max 3). This can be used simply by pressing a 
numeric value (1,2 or 3) followed by F86. 

 
The link between the POS and the Fidelio PC is via an RS232 link. The programming 

of Fidelio is as follows in the S2001.INI file , because the Interface can be used on 

other PMS systems settings are available to allow different uses of certain fields. 
Please refer to the PMS supplier for Information on their specific requirements :- 
 

:: **********************FIDELIO LINK START**************************** 
 
:: THIS SETTING IS FOR USE ON ALL MACHINES IN THE SYSTEM IT SETS WHICH 
:: POS TERMINAL IS LINKED TO THE FIDELIO PC. REMOVE THE # AND SET THE 
:: POS NUMBER. ALL POS 
 
# MFTILL=1 
 
:: THIS SETTING IS FOR THE POS THAT IS CONNECTED TO THE FIDELIO PC ONLY 
:: IT MUST NOT BE SET ON ANY OTHER POS. 
 
:: FIDELIO CONNECTED POS ONLY. 
:: REMOVE THE # AND SET THE RS232 PORT NUMBER 
 
# MFPORT=1 
 
REM THE LINE BELOW SETS THE SITE ID 
::ALL POS 
 
# MFID=1 
 
::THE LINE BELOW SETS THE TIMEOUT IF NO REPONSE IS RECIEVED FROM  
::FIDELIO. (DEFAULT IS 30) 
 
# MFTMO=30 
 
::THE LINE BELOW SETS THE GUEST CHECK/ORDER FIELD SENT TO FIDELIO.  
::0 SENDS TRANSACTION NUMBER. 1 SENDS TABLE NUMBER 
 
# MFGCON=0 
 
::THE LINE BELOW SETS THE TAX FIELDS SENT TO FIDELIO.  
::0 SENDS TAX FIELDS SET TO ZERO. 1 SETS THE TAX FIELDS ACTIVE 
 
# MFTAX=0 
 
::THE LINE BELOW SETS PROMOTIONS USED FOR GRATUITY. 
::SET n TO THE PROMO NUMBER 
 
# PROMGRATn=1 
 
::**********************FIDELIO LINK END******************************