Read Sharp UP-X300 (serv.man45) Service Manual online
UP-X300V
Specifications
1 – 1
CHAPTER 1. Specifications
1. APPEARANCE
AC power cord
The terminal should be plugged into an outlet which has a dedicated ground.
Power switch
Set the power switch to the ON ( I ) position after the terminal has been
properly plugged in.
properly plugged in.
Power indicator
When the power switch is turned on, the power indicator will light up. The
indicator will remain on even while the display’s backlight is off.
indicator will remain on even while the display’s backlight is off.
■
DISPLAY
Display angle
The LCD display may be tilted for the best viewing/operational angle.
The allowable angle of display is within 53 degrees as illustrated below.
Caution: Do apply excessive pressure to the LCD display.
Make sure to hold the body when pulling the display.
■
RESET SWITCH
Caution: Please do not use this switch unless instructed to do.
Using this Reset switch may damage or delete data.
2. RATING
■
Front view
Magnetic card reader
Operator display
(touch panel)
(touch panel)
Power indicator
■
Rear view
AC power cord
Power switch
(located at the bottom cabinet)
(located at the bottom cabinet)
Side cover
USB 2.0 x 2
(supports connection for external peripherals
such as CD-ROM unit, FDD unit, mouse, etc.)
such as CD-ROM unit, FDD unit, mouse, etc.)
PS/2 port
(Connection
for AT keyboard etc.)
for AT keyboard etc.)
Volume control
(Turn frontwards to increase
the volume turn backwards to
decrease the volume)
the volume turn backwards to
decrease the volume)
Reset switch
Side cover
Side cover release lever
(located at the bottom cabinet)
(located at the bottom cabinet)
■
Terminal Connection/
Controls inside the side cover
[Purpose] This switch is used to initiate the POS terminal hardware reset.
[Outline] The Reset switch is a single shot type.
Depressing the switch inward (ON):will restart the system hardware (reboot).
V
Power supply
AC 230 ~ 240V
Power consumption
43W
Ambient temperature
and humidity
and humidity
5 to 35°C (41 to 95°F)
20 to 90%
External dimensions
318(W) x 311(D) x 284(H)
Weight
5.7kg
53
Click on the first or last page to see other UP-X300 (serv.man45) service manuals if exist.