Read Sharp UP-X200 (serv.man18) Driver / Update online
4
Pos programming / Employee / Revenue centre / Room / Table range
Even a table range was set for a Clerk a normal registration without table number entry was possible. Now only table registrations are possible
in such a case.
2. Customer Transaction Report in BO
2. Customer Transaction Report in BO
Latest Print layout is selected for Reports
A selected “Date Range” at the filter setting is printed correctly on the report now.
3. UP-X300 in network environment
Problems occurred in case many pre-set changes (changes with big data base files) were done at the BackOffice while registrations are
3. UP-X300 in network environment
Problems occurred in case many pre-set changes (changes with big data base files) were done at the BackOffice while registrations are
continued at another terminal in the system and the preset saving process (after leaving preset job) took a long time.
Sometimes at shutdown the message with “PLEASE WAIT” took a long time and it sometimes resulted in a POPUP error “Error in preservation
of the database”
After rebooting and power failure processing every think worked fine again
To prevent the above mentioned problems, the Time-Out of the “Service task” is extended from 1 minute to 20 minutes.
4. The following Free Text bug has been resolved:
4. The following Free Text bug has been resolved:
In case by INI file it is set that the free text should be entered "after item “entry the following incorrect behaviour occurred.
Open table -> register condiment (f.e. green salad and dressing) -> Nbal -> reopen table -> change menu -> register article (sprite) -> press
free text -> Nbal
On the KP the former condiment together with the free text was printed. This problem only occurred in case the PLU-Menu screen was changed
On the KP the former condiment together with the free text was printed. This problem only occurred in case the PLU-Menu screen was changed
during the above registration.
5. Z-Counters [SZCOUNT] for “Online” access
5. Z-Counters [SZCOUNT] for “Online” access
Regardless of the Online setting the above counters were at EOD always automatically saved (after EOD) in the Preset / Sales folder.
This has been corrected so that the Z counters are only saved if they are selected to be stored in the above folder.
6. Table reservation time
This has been corrected so that the Z counters are only saved if they are selected to be stored in the above folder.
6. Table reservation time
Previously it was possible to set an overlapping Table reservation time. This has been improved.
Now overlapping entries are not accepted and there must be 30 minutes between two reservations.
7. Server / Backup-Server system with compulsive Terminal CCD
7. Server / Backup-Server system with compulsive Terminal CCD
CCD compulsive flag was not reset at the Backup-Server after CCD and EOD with Shutdown and re-boot.
8. Customer Bill
8. Customer Bill
At Customer Bills the reported transaction amount is suddenly no longer corrected.
In another case the finalisation of a transaction for a specific customer caused the terminal to go to Windows CE desktop.
Both above mentioned Bugs have been corrected.
9. Condiment accumulation print out at Kitchen Printer
9. Condiment accumulation print out at Kitchen Printer
The following bug has been resolved.
Example:
Click on the first or last page to see other UP-X200 (serv.man18) service manuals if exist.