UP-X200 (serv.man18). UP-X300 Version History 1.6.0.16 (This document contains all the specification changes and Bug fixes upto version 1.6.0.16) - Sharp EPOS Driver / Update

up-x200 (serv.man18) driver / update
Model
UP-X200 (serv.man18)
Pages
14
Size
48.99 KB
Type
PDF
Document
Driver / Update
Brand
Device
EPOS / UP-X300 Version History 1.6.0.16 (This document contains all the specification changes and Bug fixes upto version 1.6.0.16)
File
up-x200-sm18.pdf
Date

Read Sharp UP-X200 (serv.man18) Driver / Update online

1
UP-X 300/200 Version History
Version
Specification/Resolved Issue
X300
V1.6.0.16
X200
V1.2.0.16
[Compatibility]
The Version 1.6.0.16 is fully compatible with version 1.6.0.15. (All 1.6.x.x versions)
[OS versions]
UP-X300 OS version 1.07
UP-X200 OS version 1.23
The following item 1 to 3 are specification changes or addition
1.  The lowest IP number of terminal is used to identify terminal of the .pos file for PMS software I/F
In order to identify which terminal a transaction has been performed at, the unique IP number will be sent from the terminal for identification
by the PMS
2. \TEMP \FE Log is no longer used
The FELog file in the TEMP folder is no longer created this is a performance improvement measure
3.  Improvement in performance of CF Card saving during on line PC downloads
In extreme cases of large data downloads from the B/O PC it is possible that the data could become corrupt at time of saving to CF card.
This has now been resolved by introducing a timer setting in the X_300MainWindow.ini (OnlInter=30)
X300
V1.6.0.15
X200
V1.2.0.15
[Compatibility]
The Version 1.6.0.15 is fully compatible with version 1.6.0.14. (All 1.6.x.x versions)
[OS versions]
UP-X300 OS version 1.07
UP-X200 OS version 1.23
The following item 1 is a specification changes or addition
1.  Using third party PMS software
If a room was set as not active. ie the first field within the Room.dat file is set to a zero
the X300 still allows items to be posted to this room and all post data is lost.
This issue is now resolved (V1.6.0.15) and the following message will appear “NOT AVAILABLE/ ROOM GUEST”
X300
V1.6.0.14
X200
V1.2.0.14
[Compatibility]
The Version 1.6.0.14 is fully compatible with version 1.6.0.13. (All 1.6.x.x versions)
[OS versions]
UP-X300 OS version 1.07
2
UP-X200 OS version 1.23
1. Void/Refund/Return Report at EOD is improved.
A Void/Refund/Return report in EOD, reports now all data since the last EOD. Previously only the data of the current valid day was reported.
The following items 1 to 2 are resolved problems
1. Real clerk key with the function “One shot Clerk key” activated is now working correctly.
After several hundreds times of clerk real key sign on / sign off, the function suddenly stops working, and a reboot of the terminal is required,
to clear out the buffer. This version resolves the issue for contact-less clerk keys.
2. Log file for Debug purposes is switched off.
The creation of the above mentioned log file is now inhibited. It may have caused at the previous version in same cases for performance down
and strange “Error messages”.
The following items 1 to 3 are specification changes or additions
X300
V1.6.0.13
X200
V1.2.0.13
[Compatibility]
The Version 1.6.0.13 is fully compatible with version 1.6.0.10. (All 1.6.x.x versions)
[OS versions]
UP-X300 OS version 1.07
UP-X200 OS version 1.23
1. Closed Transaction in Server / Backup-Server
In case the system parameter POS Programming / System Setting / Administrator / System Setting / [System] is set to “continue”.
If the Closed Transaction file became full the deletion of old entries started at the terminals. The long time needed for data deleting and POS
Server and Backup Server synchronisation resulted in the fact that some terminals in a system look like they were frozen.
Due to the above unfavourable behaviour we returned to original specification. If Closed Transaction file is full, no more registrations will be
stored in the close transaction file.
2. Tied Condiment accumulation print out at Kitchen Printer
A KP print out with modified Qty print of the tied condiments is now possible.
This new feature provides an improvement, especially if more than one entry for one tied condiment is selected.
Example in case the relevant condiment table is set to “KP item accumulation” and the max. entry number is set to 6 entries:
Example at entry:
1st entry: [Ice Cone] --[Chocolate]--[Chocolate]--[Chocolate]--[Vanilla]--[Cappuccino]--[Melon]
Next entry : [Ice Cone]--[Chocolate]--[Chocolate]--[Chocolate]--[Vanilla]--[Cappuccino]-- [Melon]
3
Print out on Kitchen printer receipt:
a) KpCondimentTiedQtyModify=0 [Specification is like at V.1.6.0.8]
2 x Ice Cone
  6 x Chocolate
  2 x Vanilla
  2 x Cappuccino
  2 x Melon
b) KpCondimentTiedQtyModify=1 [Modification of the tied Qty’s printed]
2 x Ice Cone
  3 x Chocolate
  1 x Vanilla
  1 x Cappuccino
  1 x Melon
At KP accumulation the example b) is easier to understand for the person who realises the food preparation (meaning is that each of the
Condiment main item is prepared with the later printed tied condiments). The Condiments are accumulated regardless of the sequence the
items are entered and the KP print out is modified for better/easier understanding/preparation.
 A new parameter [KpCondimentTiedQtyModify ] in “X300_MainWindow.ini” file has been introduced.
3. Tied-Condiment with 0 price accumulation on the Bill
With the following settings the previous new specification introduced at the Enhancement_2 version was claimed.
Set the Bill layout to print tied condiments with 0 prices on the bill.
Set "Bill mandatory accumulation" at condiment programming to “No”.
Register 1 x Green salad with Yogurt and 1 x Green salad with French.
The bill print out look like:
2 x Green salad
     Yogurt
But the linked condiments items should not be accumulated and all should be printed.
Now all linked zero priced condiments are printed with the correct corresponding Qty.
The following items 1 to 11 are resolved problems
1. Compulsive table number entries
4
Pos programming / Employee / Revenue centre / Room / Table range
Even a table range was set for a Clerk a normal registration without table number entry was possible. Now only table registrations are possible
in such a case.
2. Customer Transaction Report in BO
Latest Print layout  is selected for Reports
A selected “Date Range” at the filter setting is printed correctly on the report now.
3. UP-X300 in network environment
Problems occurred in case many pre-set changes (changes with big data base files) were done at the BackOffice while registrations are
continued at another terminal in the system and the preset saving process (after leaving preset job) took a long time.
Sometimes at shutdown the message with “PLEASE WAIT” took a long time and it sometimes resulted in a POPUP error “Error in preservation
of the database”
After rebooting and power failure processing every think worked fine again
To prevent the above mentioned problems, the Time-Out of the “Service task” is extended from 1 minute to 20 minutes.
4. The following Free Text bug has been resolved:
In case by INI file it is set that the free text should be entered "after item “entry the following incorrect behaviour occurred.
Open table -> register condiment (f.e. green salad and dressing) -> Nbal -> reopen table -> change menu -> register article (sprite) -> press
free text -> Nbal
On the KP the former condiment together with the free text was printed. This problem only occurred in case the PLU-Menu screen was changed
during the above registration.
5. Z-Counters [SZCOUNT] for “Online” access
Regardless of the Online setting the above counters were at EOD always automatically saved (after EOD) in the Preset / Sales folder.
This has been corrected so that the Z counters are only saved if they are selected to be stored in the above folder.
6. Table reservation time
Previously it was possible to set an overlapping Table reservation time. This has been improved.
Now overlapping entries are not accepted and there must be  30 minutes between two reservations.
7. Server / Backup-Server system with compulsive Terminal CCD
CCD compulsive flag was not reset at the Backup-Server after CCD and EOD with Shutdown and re-boot.
8. Customer Bill
At Customer Bills the reported transaction amount is suddenly no longer corrected.
In another case the finalisation of a transaction for a specific customer caused the terminal to go to Windows CE desktop.
Both above mentioned Bugs have been corrected.
9. Condiment accumulation print out at Kitchen Printer
The following bug has been resolved.
Example:
Page of 14
Display

Download Sharp UP-X200 (serv.man18) Driver / Update

Here you can read online and download Sharp UP-X200 (serv.man18) Driver / Update in PDF. UP-X200 (serv.man18) driver / update will guide through the process and help you recover, restore, fix, disassemble and repair Sharp UP-X200 (serv.man18) EPOS. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.