Read Sharp UP-X200 (serv.man18) Driver / Update online
11
End application)
9. Send Print data was previously lost under the condition that the paper near-end check was set as "Yes" and the printer was switched off.
10. Modem connection was at the previous versions only working correctly at the UP-X300 COM port 1. Now it works correctly at all COM
9. Send Print data was previously lost under the condition that the paper near-end check was set as "Yes" and the printer was switched off.
10. Modem connection was at the previous versions only working correctly at the UP-X300 COM port 1. Now it works correctly at all COM
ports.
11. The initialization of a connected modem was previously not correctly performed. With Online activated at COM 2 or 3 a part of the
initialisation command was still send to COM1. In case a printer was connected to COM1 this sometimes resulted in a print of strange
initialisation command was still send to COM1. In case a printer was connected to COM1 this sometimes resulted in a print of strange
character.
12. The ATCOM.INI can now be modified via the BackOffice programming:
/POS Device programming/ Device programming / Online
/POS Device programming/ Device programming / Online
Ensure the X300 OS is V1.07 and X200 OS is 1.23
X300
V1.4.11.1
X200
V1.0.10.0
Version 1.4.11.1 is compatable with 1.4.7.0 and above, please do not select "keep current data" if upgrading from a version
older than 1.4.7.0, also do not copy and paste PRESET folder from versions older than 1.4.7.0
The following items 1 to 4 are specification changes or additions
1. Employee Calculation Report has been added
1. Employee Calculation Report has been added
Please note the report is only shown in B/O
2. Auto Shutdown and Reboot after EOD
2. Auto Shutdown and Reboot after EOD
Dependent upon the setting within the configuration file the Terminal can be set to automatically shutdown and reboot after Manual EOD or
Timed EOD is carried out, V1.4.11.1 is set to shutdown after manual EOD (added reliability/performance)
3. Reboot button is added to the "Memory Warning" message screens
4. Partition Dismount at Manual Shutdown
Dependent upon the setting within the configuration file the HD2 partition will be dismounted at time of manual shutdown, to access HD2 at
this point tap the screen 20 times. (added reliability/performance)
The following items 5 to 16 are resolved problems
5. In case of bad wireless conditions buffered print jobs of x200 have often been issued twice, the message << reprint >> is now printed at
5. In case of bad wireless conditions buffered print jobs of x200 have often been issued twice, the message << reprint >> is now printed at
Click on the first or last page to see other UP-X200 (serv.man18) service manuals if exist.