Read Sharp UP-5900 (serv.man7) Service Manual online
UP-5900VI
Removing the power supply unit and AC cord
– 2 –
5. Removing the power supply unit
and AC cord
1) Remove the two screws
1
.
2) Remove the AC cord cover
2
.
3) Remove the three screws
3
.
4) Remove the bottom plate
4
.
5) Remove the screw
5
and cable holder
6
.
6) Remove the power supply unit and AC cord.
a) Remove the screw
7
and the earth wire
8
.
b) Remove the four screws
9
.
c)
Remove the power supply cover
F
.
d) Remove the power supply cable
G
.
e) Use a minus screwdriver
A
to looser the AC cord fixing screws
(2 pcs.) of the power supply unit.
f)
Remove the three screws
H
.
6. Replacing the power supply unit
and AC cord
Install the in the power supply unit and AC cord in the reverse order of
removing.
removing.
Before installing, make sure that each connector is connected securely.
3
4
6
5
1
2
*
When connecting the AC cord to the power supply unit in assembly,
tighten with the torque of 3 kg/cm
m
1 kg/cm.
A
7
10
11
12
12
9
9
9
8
Click on the first or last page to see other UP-5900 (serv.man7) service manuals if exist.