UP-3515 (serv.man7). UP3515 instruction Manual - Sharp EPOS User Guide / Operation Manual. Page 17

• Use the reading function (X) to take the reading of sales information entered after the last resetting. You 

can take this reading any number of times. It does not affect the POS terminal’s memory.

• Use the resetting function (Z) to clear the POS terminal’s memory. Resetting prints all sales information 

and clears the entire memory except for the GT1 through GT3, reset count and consecutive number.

• X1 and Z1 reports show daily sales information. You can take these reports in the X1/Z1 mode.
• X2 and Z2 reports show periodic (monthly) consolidation information. You can take these reports in the X2/

Z2 mode.

• In the OPXZ mode, a clerk and/or cashier can take his or her report.
• If you want to stop the printing report, touch the 

[CANCEL] key. Even if the printing is stopped, the 

consecutive number (and Z counter if you are printing a Z report) is increased by one.

■

 

1.  Touch the 

[MODE] key to display the mode selection window.

 

2.  Select “X1/Z1 MODE” or “X2/Z2 MODE”.

 

3.  Select “READING”.

 

4.  Select the desired report title.

 

5.  If needed, specify the data range of the report.

 

6.  Select a device (“DISPLAY” or “PRINT”) to receive the output. 

To cancel report taking, select “CANCEL”.

 

1. Touch the 

[MODE] key to display the mode selection window.

 

2. Select “X1/Z1 MODE” or “X2/Z2 MODE”.

 

3. Select “RESETTING”.

 

4. Select the desired report title.

 

5. If needed, specify the data range of the report.

 

6.  The message “ARE YOU SURE? RESET OK?” appears. 

Select “YES” to reset the sales information. 
Select “NO” to save the sales information.

 

1. Touch the 

[MODE] key to display the mode selection window.

 

2. Select “OPXZ MODE”.

 

3. Select “READING”.

 

4. Select the desired report title.

 

5. If needed, specify the data range of the report.

 

6.  Select a device (“DISPLAY” or “PRINT”) to receive the output. 

To cancel report taking, select “CANCEL”.

 

1. Touch the 

[MODE] key to display the mode selection window.

 

2. Select “OPXZ MODE”.

 

3. Select “RESETTING”.

 

4. Select the desired report title.

 

5. If needed, specify the data range of the report.

 

6.  The message “ARE YOU SURE? RESET OK?” appears. 

Select “YES” to reset the sales information.  
Select “NO” to save the sales information.