UP-3500 (serv.man27). UP3500 V2 Programming Manual (ROM 1.10) please refer to version history release notes 17 12 08 - Sharp EPOS Service Manual (repair manual). Page 62

UP-3500 (V) SRV MODE PROGRAMMING (“7 SD CARD MODE”)

5 – 8

Electronic journal data is saved in SD card.
Maximum 400 times data is kept in SD Card when the SD memory is
not full.

Note: In case of “SAVE & CLEAR”, after saving EJ data to SD card, the

EJ data in ECR is eresed.

The action is as below.

1) After reading the information of the current sub-folder in “SRE-

CORD.REC” file, ECR creates the new sub-folder under the folder
for “Electronic Journal”.
Its folder is named ASCII Character that is indicated the number of
sales data in SD Card.
(Example: “001”, “002”, “003”,...... )

2) Save the below data in new sub-folder that is created above step.

3) Create the “STATUS.REC” file in new sub-folder when all files are

saved completely.

4) Update the “SRECORD.REC” file for changing the structure of sub-

folder.

5) In case of “SAVE & CLEAR” job, Save the below data in the folder

for “EJ for ONLINE”.
(If “READ” is written in “STATUS.REC” file, current EJ file in SD
card is deleted and new EJ file is created. (*2)
In the other cases, new EJ records are added to current EJ file data
in SD card.)

6) In case of “SAVE & CLEAR” job, Create (or Update) the “STA-

TUS.REC” file in the folder for “EJ for ONINE” when all files are
saved completely.

7) In case of “SAVE & CLEAR” job, Erase the EJ data in ECR.

(*1) The contents of each file are same as the communication data

of “ONLINE FUNCTION”.
Details of “File No.”, “Table No.” and “Field” are described in
“ONLINE SPECIFICATION”.

Note:

•  If the folder for “Electronic Journal” does not exist in SD memory

card, this job is inhibited.
[“NO FOLDER” ERROR]

•  If the folder for “EJ for ONLINE” does not exist in SD memory card,

this job is inhibited.
[“NO FOLDER” ERROR]

•  SRV#988_B : Control Character is converted to SPACE when EJ

data is saved in SD card 

(*2) “READ” is written by ONLINE JOB “UPLOAD EJ DATA from

SD CARD”.

T-LOG data is saved in SD card.

Maximum 400 times data is kept in SD Card when the SD memory is
not full.

Note: In case of “SAVE & CLEAR”, after saving T-LOG data to SD

card, the T-LOG data in ECR is eresed.

The action is as below.

1) After reading the information of the current sub-folder in “SRE-

CORD.REC” file, ECR creates the new sub-folder under the folder
for “T-LOG data”.
Its folder is named ASCII Character that is indicated the number of
sales data in SD Card.
(Example : “001”, “002”, “003”,...... )

2) Save the below data in new sub-folder that is created above step.

3) Create the “STATUS.REC” file in new sub-folder when all files are

saved completely.

4) Update the “SRECORD.REC” file for changing the structure of sub-

folder.

5) In case of “SAVE & CLEAR” job, Save the below data in the folder

for “T-LOG for ONLINE”.
(If “READ” is written in “STATUS.REC” file, current T-LOG file in SD
card is deleted and new T-LOG file is created. (*2)
In the other cases, new T-LOG records are added to current T-LOG
file data in SD card.)

6) In case of “SAVE & CLEAR” job, Create (or Update) the “STA-

TUS.REC” file in the folder for “T-LOG for ONLINE” when all files
are saved completely.

File Name

File/Table

No. (*1)

Field  (*1)

EJ Data

EJFILE  .FDS
EJFILE  .SDA

A0

File Name

Status information

STATUS . REC

File Name

Record structure

SRECORD.REC

File Name

File/Table

No. (*1)

Field  (*1)

EJ Data

EJFILE  .FDS
EJFILE  .SDA

A0

File Name

Status information

STATUS.REC

YES/NO = 2/0

              

Control Character  : 0x00 - 0x1F, 0xFE, 0xFF
Space Character  : 0x20

File Name

File/Table

No. (*1)

Field  (*1)

T-LOG Data

TLOGFILE. FDS
TLOGFILE. SDA

88

File Name

Status information

STATUS . REC

File Name

Record structure

SRECORD. REC

File Name

File/Table

No. (*1)

Field  (*1)

T-LOG Data

TLOGFILE. FDS
TLOGFILE. SDA

88

File Name

Status information

STATUS . REC