GENERAL (serv.man24). User Manual - Sharp EPOS User Guide / Operation Manual. Page 123

122

NetSupport allows you to set up multiple profiles for different Control Users, each with their
own access and functionality levels.

Each configuration can be protected by a password and an icon can be created on the
desktop to load the Control with a particular named configuration.

You must have NetSupport Administrator rights to profile or change a Controls Configurations.

To create a Profile
1. 

Choose {Tools}{Configurations} from the Control drop down menu bar.

2. 

The Control Configurations dialog will be displayed.

3. 

Select the Configuration that you want to change or choose New to create a new one. By
default NetSupport is installed with a single profile called Standard. This is set up for full
functionality.

4. 

Click Settings to tailor the global functionality of this profile. Or,
Click on Transport and Startup Settings to tailor the Basic Functionality.

During any NetSupport Control session where you may be working with multiple connected
Clients, you can tailor how each of these Clients interacts with the Control. These settings only
affect the Client during that session.

For example, on one Client you may want to use compression because it is on a slow link, but
on another you may want to turn compression off.

NetSupport allows you do this by modifying the default settings for the current Control Profile.

To modify the settings of a Profile
1. 

Select the Client for which you want to alter the default Settings.

2. 

Right click and choose Settings for Client. Or,
Choose {Client}{Client Settings} from the Control Window drop down menus.

3. 

This will display the Client Settings dialog.

4. 

Edit as necessary.

Note: If you edit the Client Settings, the changes you make only apply to that Client during the
current Control session. If you wish to change the settings permanently check the Update
Configuration box.