Read Sharp ER-A750 Handy Guide online
ER-A750
SCANNING SET-UP
This guide is provided to enable you to set up an ER-A750 ready for scanning
bar codes.
bar codes.
REQUIREMENTS.
1.ER-A750.
2.PRS OPTION ROM BOARD.
3.BAR CODE SCANNER.
2.PRS OPTION ROM BOARD.
3.BAR CODE SCANNER.
SET-UP PROCEDURE (OPTION BOARD).
1. Power off the ER-A750 and fit the PRS Option board into the socket at the back of
the ER-A750.
the ER-A750.
2. You must now Master Reset the ER-A750.
3. After Master Reset select Service Settings
4. From the settings menu select item 16 which is License Code.
5. You are now asked to make a selection of the various options they are:-
SMARTCARD, EFT(F85), MODEX(F105), GIROVEND, CARDINAL(SCR60),
or SCANNING.
SMARTCARD, EFT(F85), MODEX(F105), GIROVEND, CARDINAL(SCR60),
or SCANNING.
6. After making the selections a new menu will appear asking for an
AUTHORISATION CODE
It is at this point that you must speak to John Gallagher of PRS he will give you the
code to enter. (Tel 01482 873214)
AUTHORISATION CODE
It is at this point that you must speak to John Gallagher of PRS he will give you the
code to enter. (Tel 01482 873214)
PROGRAMMING PROCEDURE.
SRV MODE.
1. From the Service Menu select settings
2. Select DEVICE ASSIGN
3. From the device assign table select item 22 which is SCANNER.
4. Then enter the Channel Number you want to connect the Scanner to.
Click on the first or last page to see other ER-A750 service manuals if exist.