Read Sharp DOS HOSPITALITY Handy Guide online
UP-5300/5700
14
10. Backup & Restore Utility
This program will allow the installation of the hospitallity program and also enables
the installation of the diagnostic utility program.
the installation of the diagnostic utility program.
To use the Backup and Restore utility you will need the following:
Hardware / Software
1. APLD Cable (Refer to cables section)
2. PC (with Rs232 serial com port)
3. Disk 1 of 2 (Which Contains the demo hospitality program)
4. Disk 2 of 2 (Which contains the Backup & Restore program)
5. Blank.exe which contains the Blank hospitality application.
2. PC (with Rs232 serial com port)
3. Disk 1 of 2 (Which Contains the demo hospitality program)
4. Disk 2 of 2 (Which contains the Backup & Restore program)
5. Blank.exe which contains the Blank hospitality application.
PC Setup
Insert Disk 1 of 2 and from windows explorer run a:\setup95.bat when finished close
the dos prompt. This will create the following folders and subfolders.
the dos prompt. This will create the following folders and subfolders.
C:\UP5700.PAK\FLASH
C:\UP5700.PAK\RAM
The folders FLASH and RAM contain the files that will make up the Demo Pos
application.
application.
Insert Disk 2 of 2 and from windows explorer run a:\Install.bat when finished close
the dos prompt.
This will install the Backup and Restore program icons and create the following
Backup folder C:\UP5700.BAK and subfolders and files as shown.
the dos prompt.
This will install the Backup and Restore program icons and create the following
Backup folder C:\UP5700.BAK and subfolders and files as shown.
To run the either of the POS SERIAL backup and restore or the POS NETWORK
backup.
Select the following icons from the START menu PROGRAMS
backup.
Select the following icons from the START menu PROGRAMS
Or
REMEMBER YOU CAN ONLY RESTORE USING THE
APLD CABLE… Via the POS SERIAL BACKUP OPTION.
Click on the first or last page to see other DOS HOSPITALITY service manuals if exist.