DOS HOSPITALITY (serv.man5). Waitermate Program Operation Manual Ver 1.05 - Sharp EPOS User Guide / Operation Manual. Page 4

As the Waitermate uses Disk Space the machine that controls the Waitermate System MUST have
memory Board Fitted  (UPP02MB) if it is a Flash/Ram Terminal. If it is a Hard Disk POS the memory
is not required. It is recommended that if the installation is not a Standalone that the Waitermate Control
POS is a slave. In order to avoid unnecessary use of Disk space
the files required to Run the Waitermate system are contained in a special upgrade, this allows these files
only to be loaded when necessary. Contained in the Waitermate release is the Batch files
WMFLASH.BAT and WMHDD.BAT these files will upgrade any version 4 system to Waitermate.

N.B Using this upgrade on Version 3 POS Software will NOT work. The Waitermate Upgrades will
be carried on our Technical Web Site as are the Application Upgrades.

After Upgrading /Installing a Version 4 System select the machine to be the Waitermate Control POS
and then connect it to a PC using an APLD Cable. Then using WMFLASH.BAT for Flash/Ram POS
and WMHDD.BAT for Hard Disk POS follow the Instructions on the PC screen. When this has been
completed the POS is ready for Waitermate Connection. It is only necessary to carry this out at the
Control POS.