XE-A217 (serv.man7). XE-A217 Operation Manual - Sharp ECR User Guide / Operation Manual. Page 126

Read Sharp XE-A217 (serv.man7) User Guide / Operation Manual online

126
Removing the receipt paper roll
When colored dye appears on the edges of the paper roll, it is time to replace the paper roll.  Use paper of 
57.5 ± 0.5 mm in width.  To prevent jamming be sure to use paper specified by SHARP.
1.
  Confirm that the REG mode has been selected.
2.
  Remove the printer cover.
3.
  Lift up the print roller arm.
4.
  Remove the remaining paper roll from the paper roll cradle.
5.
  Install a new paper roll correctly by following the steps in “Installing the Paper Roll.”
Print roller arm
Removing the Paper Jam
Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself. Never
touch the printer head immediately after printing, as the head may still be hot.
1.
  Remove the printer cover.
2.
  Lift up the print roller arm.
3.
  Remove the paper jam. Check for and remove any shreds of paper that may remain in the printer.
4.
  Reset the paper roll correctly by following the steps in “Installing the Paper Roll.”
Print roller arm
Page of 127
Display

Click on the first or last page to see other XE-A217 (serv.man7) service manuals if exist.