Read Sharp XE-A217 (serv.man7) User Guide / Operation Manual online
124
Replacing the Paper Roll
■
Recording paper specifications
Be sure to use paper rolls specified by SHARP.
The use of any other paper rolls than specified could cause paper jamming, resulting in register malfunction.
The use of any other paper rolls than specified could cause paper jamming, resulting in register malfunction.
Paper specification
Paper width:
57.5 ± 0.5 mm
Max. outside diameter: 80 mm
Quality:
Quality:
High quality(0.06 to 0.08 mm thickness)
• Be sure to set a paper roll prior to using your machine, otherwise it may cause a malfunction.
Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.
To the printer
Incorrect
To the printer
Correct
Correct
Incorrect
(How to set the paper roll)
(How to cut the paper end)
■
Installing the Paper Roll
Always install the paper roll even when you set the register for not printing receipt in REG mode.
1.
Remove the printer cover.
2.
Lift up the print roller arm.
3.
Set the paper correctly in the paper roll cradle.
NOTE
Before placing a new paper roll in the paper
roll cradle, cut off the pasted (taped) part of the
paper and confirm that the cut end of the paper is
straight.
roll cradle, cut off the pasted (taped) part of the
paper and confirm that the cut end of the paper is
straight.
Print roller arm
Click on the first or last page to see other XE-A217 (serv.man7) service manuals if exist.