Read Sharp XE-A213 (serv.man3) Service Manual online
XE-A203/A213
PROGRAM MODE
2 – 16
5. EASY PROGRAMMING
Easy programming roughly consists of the following two types of pro-
gramming.
gramming.
1. Direct key or code entry type.
2. Guidance message type on usual programming.
Reports that show the contents of individual programming can be
printed.
printed.
[PURPOSE]
It aims to be able to program easily by using the guidance messages by
the easy programming.
the easy programming.
[OPERATION]
Perform the programming to enter the parameter according to the guid-
ance message.
The guidance message is displayed on the LCD-display every time.
ance message.
The guidance message is displayed on the LCD-display every time.
It shows the information related the entry data at each step.
Each programming data and the text data is entered by using a key-
board.
board.
It is used some key as special key to enter each data at the Easy Pro-
gramming operation.
gramming operation.
There are follows.
1. DIRECT KEY OR CODE ENTRY TYPE
<PROGRAMMING METHOD>
At PGM mode, it becomes set up mode, as it pushes a key of a direct
key or code entry that it wants to set up.
key or code entry that it wants to set up.
For example:
Push DEPT1 key, if you want to set up DEPT1 items.
Push %1 key, if you want to set up %1 item.
After that, every time it pushes [#/TM/ST](XE-A203V) or [ST](XE-A213V) key,
a set up item changes with price, text, programming ...
Push %1 key, if you want to set up %1 item.
After that, every time it pushes [#/TM/ST](XE-A203V) or [ST](XE-A213V) key,
a set up item changes with price, text, programming ...
To change a programming content, it changes it using a numeric key.
As additional way, [00] key can be used as a incrementer while an indi-
cator lights on.
i.e. By pushing [00] key for a digit of parameters, a figure changes 0
As additional way, [00] key can be used as a incrementer while an indi-
cator lights on.
i.e. By pushing [00] key for a digit of parameters, a figure changes 0
3
1
3 2 ...
The data is changed by pushing [#/TM/ST](XE-A203V) or [ST](XE-A213V)
key, and the display shows a content of the next item.
After that, the operator program the next set up item.
key, and the display shows a content of the next item.
After that, the operator program the next set up item.
If a set up ends, it pushes [TL/NS] key.
It shows the list of programmable data by this method ("Direct key entry
type") on the next page.
It shows the list of programmable data by this method ("Direct key entry
type") on the next page.
It shows every set up item and example of display to the following.
<KEY SEQUENCE>
<DEPT>
<PLU>
KEY
CONTENTS OF USE
a Numerical key (0, 1 to 9) Used for numerical number entry.
b Double-zero key ([00])
Used for parameter entry and character
code entry.
code entry.
c Clear key ([CL])
Used for cancel entry.
d Point key ([.])
Used for decimal point entry and
right moving entry (as right cursor key).
right moving entry (as right cursor key).
e Multiplication key([X])
Used for left moving entry (As left cursor key).
f
Subtotal key ([ST])
Used for data decision entry.
g Finalization key ([TL])
Used for programming termination entry.
Function
key
Step
Programmable
data
Entry type
Default
(MRS)
DEPT
[DEPTn]
or
DEPT
code +
[DEPT#]
or
DEPT
code +
[DEPT#]
1
Text
(CHARACTER) DEPT.xx
2
Price
(NUMERIC)
0
3
Entry type
(TOGGLE)
OPEN
4
Selection of TAX1
(TOGGLE)
(*1)
5
Selection of TAX2
(TOGGLE)
(*1)
6
Selection of TAX3
(TOGGLE)
(*1)
7
Selection of TAX4
(TOGGLE)
(*1)
8
Registration type
(TOGGLE)
NORMAL
9
Sign
(TOGGLE)
(*1)
10
Limitation digits
(NUMERIC)
8
(*1) DEPT01 - 10 : VAT 1 / (+) Sign
DEPT11 - 20 : VAT 2 / (+) Sign
DEPT21
: VAT 1 / (-) Sign
DEPT22 - 99 : VAT 1 / (+) Sign
Function
key
Step
Programmable
data
Entry type
Default
(MRS)
PLU
PLUn
or
PLU
code +
[PLU/SUB]
or
PLU
code +
[PLU/SUB]
1
Text
(CHARACTER) PLU.xxxx
2
Price
(NUMERIC)
0
3
Dept code
(NUMERIC)
01
4
Type
(TOGGLE)
PLU
Click on the first or last page to see other XE-A213 (serv.man3) service manuals if exist.