Read Sharp XE-A113 (serv.man3) Service Manual online
XE-A113 (V)
TEST FUNCTION
– 15 –
14) SLEEP MODE TEST
1 Key operation
2 Test procedure
Check to confirm that the machine has entered the sleep mode
(display OFF, Dp ON), and wait for a change in status (key input,
(display OFF, Dp ON), and wait for a change in status (key input,
change in RS port).
3 Display
4 Check that
• The display must be turned off. (Except for Dp)
• When a key is pressed, the machine must be reset from the sleep
state.
5 End of the test
The test will automatically be terminated and the printer prints as
follows.
15) CONTINUOUS DIAG FOR THE FTC
(*) Winding is performed regardless of ON/OFF of the winding motor.
1 Key operation
2 Test procedure
This is the diag for inspection (FTC) of the main PWB unit.
The following individual diag is performed continuously.
(Even though an error occurs, the diag is continued.)
(Even though an error occurs, the diag is continued.)
3 Display
The display must be the same as that of the individual diag display.
4 Check that
• Check that the buzzer sound, the key input, and the display are
free from abnormality.
• Check that there is no error after completion of all the diag tests.
5 End of the test
When any key is pressed under the clock display state, the test is
completed and the end print is made.
16) CONTINUOUS DIAG FOR THE PROCESS
(*) Winding is made regardless of the setting.
1 Key operation
2 Test procedure
This is the inspection diag in the assembly process.
The following individual diag is performed continuously.
(Even though an error occurs, the diag is continued.)
(*) Voltage conditions of dry cells: 1.2V or more (for each cell) for
150
Ω load.
No.
Code
Description
Operation
1
100
D I S P L AY
BUZZER TEST
BUZZER TEST
It proceed to the next item
after any key is pressed.
after any key is pressed.
2
102
PRINTER TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
3
106
PRINTER
SENSOR TEST
SENSOR TEST
It proceed to the next item
after any key is pressed.
after any key is pressed.
4
110
D R AW E R
OPEN TEST
OPEN TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
5
120
E X T E R N A L
RAM TEST
RAM TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
6
121
I N T E R N A L
RAM TEST
RAM TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
7
140
I N T E R N A L
ROM TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
8
173
W I N D I N G
MOTOR TEST
MOTOR TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
9
107
CLOCK
DISPLAY TEST
DISPLAY TEST
When any key is pressed, the diag
is terminated.
is terminated.
RCPT/PO
5
5
0
OP display :
POPUP display:
.
550
End print:
RCPT/PO
1
6
1
No.
Code
Description
Operation
1
100
D I S P L AY
BUZZER TEST
BUZZER TEST
It proceed to the next item
after any key is pressed.
after any key is pressed.
2
102
PRINTER TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
3
106
PRINTER
SENSOR TEST
SENSOR TEST
It proceed to the next item
after any key is pressed.
after any key is pressed.
4
104
KEYBOARD
TEST
TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
5
105
MODE SWITCH
TEST
TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
6
110
DRAWER
OPEN TEST
OPEN TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
7
120
EXTERNAL
RAM TEST
RAM TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
8
121
I N T E R N A L
RAM TEST
RAM TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
9
140
I N T E R N A L
ROM TEST
ROM TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
10
550
SLEEP MODE
TEST
TEST
It proceed to the next item
after any key is pressed.
after any key is pressed.
11
160
AD
CONVERSION
PORT TEST
CONVERSION
PORT TEST
It proceed to the next item
after any key is pressed.
after any key is pressed.
12
173
W I N D I N G
MOTOR TEST
MOTOR TEST
It proceed to the next item by the
automatic operation after it ends.
automatic operation after it ends.
13
107
CLOCK
DISPLAY TEST
DISPLAY TEST
When any key is pressed, the diag
is terminated.
is terminated.
161
When the
test ends normally :
test ends normally :
161
*****
When an error occurs:
An error print is made after completion of each item.
Same as the error print of each diag.
Same as the error print of each diag.
RCPT/PO
1
6
2
*
*
* *
(*) ****
=
Sum check code on each model (omissible)
Click on the first or last page to see other XE-A113 (serv.man3) service manuals if exist.