Read Sharp XE-A113 (serv.man2) Service Manual online
XE-A113 (V)
PROGRAM MODE
2 – 7
16) TAX RATE PROGRAMMING
% TAX RATE &SIGN
LOWER TAX LIMITATION 0.00 to 999.99
(This is invalid in VAT system.)
(This is invalid in VAT system.)
MRS = DELETE
17) RATE HALO PROGRAMMING FOR [%] KEY
The DECIMAL POINT must be entered for setting the decimal digits.
MRS = 100.00 (%)
18) AUTO KEY PROGRAMMING
It must be pushed same [AUTO] key as the programming [AUTO] key at
the end of any key entry.
Note: [ESC] key cannot be set at [AUTO] key programming.
It acts as a key of ERROR ESCAPE function in this programming.
< Auto key function >
This machine has [AUTO] key which can be programmed the key-
sequence data.
sequence data.
When [AUTO]-key is depressed, the machine works as same as the
programmed key-sequence is entered.
19)EURO STATUS FUNCTION
The ECR has a EURO STATUS in the preset memory.
It is changed by EURO CHANGING JOB and confirmed by EURO STA-
It is changed by EURO CHANGING JOB and confirmed by EURO STA-
TUS READING JOB at Z2 mode. Refer [CHAPTER 3. OP X/Z, X1/Z1,
X2/Z2 MODE].
20) DATE/TIME PROGRAMMING
21) VARIOUS PROGRAMMING
(EACH FUNCTIONS PROGRAMMING)
There are programmed by depressing [ST] key after a data that want to set.
And it is operated continuously until depressing the [TL] key.
And it is operated continuously until depressing the [TL] key.
[JOB#1] MACHINE No. (6digits) -- XXXXXX --
MRS = 000000
[JOB#2] CONSECUTIVE No. (4digits) -- XXXX --
MRS = 0000
[JOB#5] FUNCTION SELECT -- ABCDEFGH --
MRS = 00000001
A: TAX 1 PROGRAMMING = 1
TAX 2 PROGRAMMING = 2
TAX 3 PROGRAMMING = 3
TAX 4 PROGRAMMING = 4
Y: SIGN
Y
+
0
-
1
XXX.XXXX: RATE
= 0.0000 to 100.0000 %
XXX.XX: % HALO (0.00~100.00)
Executing mode : REG, MGR, OPXZ, X1/Z1, X2/Z2
Setting mode : PGM
(Inhibition programming)
ST
VOID ( )
ST
yxxx.xxxx
xxxxx
A
TAX RATE
& SIGN
& SIGN
TAX No.
0
LOWER TAX LIMIT
FOR ADD TAX
FOR ADD TAX
9
0
TL
XXX.XX
0
ST
% n
29
TL
(Free key)
max 25
Delete
AUTO
AUTO
TL
DATE) XXXXXXXX: YYYYMMDD (Year-month-day) or
DDMMYYYY (Day-month-Year) or
MMDDYYYY (Month-day-Year)
MMDDYYYY (Month-day-Year)
(YYYY: 2000~2099)
(MM: 01~12)
(DD: 01~31)
The date entry format complies with the applicable PGM-mode
programming.
programming.
TIME) HH: Hour (00~23)
MM: Minute (00~59)
MRS = DATE: 01012000 (DD/MM/YYYY)
TIME: 0000
A: PO in REG mode
A
ENABLE
0
★
DISABLE
1
B: RA in REG mode
B
ENABLE
0
★
DISABLE
1
C: SUBTOTAL VOID in REG mode
C
ENABLE
0
★
DISABLE
1
D: INDIRECT VOID in REG mode
D
ENABLE
0
★
DISABLE
1
XXXXXXXX
DATE
HHMM
TIME
TIME
#/TM/ST
(NK)
ST
0
AB
AB : JOB No.
NK : PROGRAMMING DATA. (Numeric Keys)
NK : PROGRAMMING DATA. (Numeric Keys)
TL
ST
Click on the first or last page to see other XE-A113 (serv.man2) service manuals if exist.