Read Sharp XE-A110 Service Manual online
2) Money case
1
Except for XE-A130 SCA (Australia) and SUK (U.K.) version
Separation from the drawer
Disallowed
Coin case
Fixed type
Number of compartments
4B/5C
Layout:
2
For XE-A130 SCA (Australia) and SUK (U.K.) version
Separation from the drawer
Allowed
Separation of the bill components from
the coin compartments
the coin compartments
Disallowed
Bill separater
Standard
Number of compartments
4B/8C
3) Lock (LOCK KEY: LKGIM7331BHZZ)
•
Location of the lock:
Front
•
Method of locking and unlocking
To lock, insert the drawer lock key into the
lock and turn it 90 degrees counter clock-
wise.
To unlock, insert the drawer lock key and
turn it 90 degrees clockwise.
lock and turn it 90 degrees counter clock-
wise.
To unlock, insert the drawer lock key and
turn it 90 degrees clockwise.
•
Key No.:
SK1-1
8. Battery
1) Memory back up battery
For memory back up, the dry battery ULM-3 (3 pieces) are needed.
1. Memory holding time:
Approx. 1 year after NEW dry batteries are inserted.
2. Battery exchange method:
When the low battery symbol "L" lights up, replace the batteries (3
AA) replaced by the following method, within 2 days.
1) Power on the ECR.
2) Mode switch turn to "REG" mode.
3) Remove the OLD dry batteries (3 pieces).
4) Insert the NEW dry batteries (3 pieces).
5) Confirm the low battery symbol "L" is off.
AA) replaced by the following method, within 2 days.
1) Power on the ECR.
2) Mode switch turn to "REG" mode.
3) Remove the OLD dry batteries (3 pieces).
4) Insert the NEW dry batteries (3 pieces).
5) Confirm the low battery symbol "L" is off.
2) Low battery
Low battery indication will appear on left side of display when the
battery voltage is low.
battery voltage is low.
CASE 1: When sitting idle or after completion of transaction.
The machine can indicate the low battery condition. (Always)
CASE 2: Low battery indication will not appear during key opera-
tions, but will appear after power up of the cash register.
[Display sample]
"
0.00 "
: Battery is OK.
"L 0.00 "
: Low battery (You have to change the batteries.)
After finalization
"F 12.34 "
"F 12.34 "
: Battery is OK.
"L 12.34 "
: Low battery. ("L" indicate instead of "F".)
3) No battery
If the user forgets to replace the battery and the battery voltage falls
below a certain level, or if a power failure occurs with no battery
installed, memory contents cannot be retained. The CPU judges it as
no battery and perform the master reset. In this case, all the settings
and registrations are cleared. If, however, the power is supplied to the
AC cord, even though no battery is installed, memory contents are
retained.
below a certain level, or if a power failure occurs with no battery
installed, memory contents cannot be retained. The CPU judges it as
no battery and perform the master reset. In this case, all the settings
and registrations are cleared. If, however, the power is supplied to the
AC cord, even though no battery is installed, memory contents are
retained.
4B/5C
Bill saparator : 1pc
4B/8C
– 4 –
Click on the first or last page to see other XE-A110 service manuals if exist.