UP-600, UP-700 (serv.man6). UP600 700 Pre-Course Study Guide - Sharp ECR Handy Guide. Page 8

ƒ  Clerk/Cashier

The Clerk/Cashier system on the UP600/700 is much more flexible than previous
machines.

You will notice a change to the System Pre-set line 910.

There is no selection required for the type of clerk system i.e. Clerk Code
entry or Clerk Pre-sets or Real keys as any combination of theses systems can now
be operational on the UP600/700.

There are 12 real Clerk keys as standard (this can be upgraded to 126)

Before you can use the Real key system you must set a key number in Program
position if the key number is left at zero then the Real Key does not work.

The Real key will always take priority over the code or pre-set entry. (E.g. if
the Real key is inserted you will be unable to sign on with another code or pre-set.)

ƒ  Overlap Clerk

The Overlap feature is for Clerks only (not Cashiers)

When setting up Overlap on this machine, as well as carrying out the usual jobs such
as creating overlap file and changing job 910-A, you will also have to set job code
909-D (Transaction in progress) even if you are not using the real key system.

Each Overlap file takes up approximately 10k of RAM

ƒ  Customer Bill Print

The GC RECEIPT feature works slightly different to the ERA770 and UP3300.

You have to use the Intermediate feature for customer bills before finalisation.

However, there is a line (928-C) which will prevent zero priced items being printed.

ƒ  Bar to Table transaction transfer

Allows for transfer of an opened, normal transaction, to be put onto a GLU

ƒ  Opened Table list on display

(Automatically at clerk insert or by key press)