Read Sharp UP-600 / UP-700 (serv.man6) Handy Guide online
E
E
C
C
R
R
/
/
E
E
P
P
O
O
S
S
T
T
r
r
a
a
i
i
n
n
i
i
n
n
g
g
8. Service Menu Settings
Some of the settings in the Service Menu are self explanatory such as G.T settings
and Z report counter, however other settings will be covered in this section.
and Z report counter, however other settings will be covered in this section.
Device Config
The first setting on the list is called Device Config.
During this next section, we will have a look at assigning devices to the UP600/700
such as Printers and PC.
such as Printers and PC.
The option devices can be assigned in either service mode or in program mode.
If you select the Device you want to assign for example Kitchen Printer a menu will
again drop down there are then fields to enter; the first of these is the terminal
number.
The number you would enter here is the terminal number if the machine that the
physical wire from the printer was connected to.
For example if the printer is connected to the master machine which is terminal
number one you would enter number one, the printing would then be routed to
terminal one then printed out.
again drop down there are then fields to enter; the first of these is the terminal
number.
The number you would enter here is the terminal number if the machine that the
physical wire from the printer was connected to.
For example if the printer is connected to the master machine which is terminal
number one you would enter number one, the printing would then be routed to
terminal one then printed out.
The channel number represents the channel on which the printer is connected.
The printer name refers to the printer you are presently setting up if you press the
list key different printer types will appear ready for your selection. If the printer type
is not on, this list selects one, which is most similar, for example if you are using the
TM200 printer select the TM300.
The printer name refers to the printer you are presently setting up if you press the
list key different printer types will appear ready for your selection. If the printer type
is not on, this list selects one, which is most similar, for example if you are using the
TM200 printer select the TM300.
The paper sheet is for single station or twin station printer.
The receipt length refers to the amount of line feeds that will occur on the end of a
Bill.
Bill.
The print type is used to select the receipt print format.
On previous models, this was a global setting for all printing. You now have the
option to specify the format for receipt or KP.
On previous models, this was a global setting for all printing. You now have the
option to specify the format for receipt or KP.
Although the printer type we chose as an example was the KP printer, all the other
printer types have very similar settings.
printer types have very similar settings.
Therefore the only other device we need to explain in the device confide area is the
On line settings.
On line settings.
On Line Settings
There are two jobs to set for PC comms.
Click on the first or last page to see other UP-600 / UP-700 (serv.man6) service manuals if exist.