UP-600, UP-700 (serv.man6). UP600 700 Pre-Course Study Guide - Sharp ECR Handy Guide. Page 20

7.3 Graphic Logo Utility

There is a self extracting zip file called logo Util.exe, once this is run 24 files will be
loaded into a default directory called c:\UP600 logo Utility.ins

From here (or the directory you have selected) run setup.exe

You now are able to use the Utility

The Utility has 2 main functions they are:-

1.  Sending Graphic Logo images to the UP600/700
2.  Converting Graphic Logo images into a format which will allow 02FD.EXE to

transmit them to the UP600/700.

You can send up to 2 Bit Map Files which you would have created on your computer
to the UP600 or UP700, ready for print out on the PR-58HA integral thermal printer.
Image 1 is used for the standard header logo
Image 2 is used for the Footer image.

This feature will simply allow you to convert an image that has been created, into a
format, that will then be accepted by another Utility called 02FD.EXE. This can then
be transmitted to your UP600/700

1. APLD CABLE (Refer to CABLE section)
2. RJ45 to 9pin cable (Refer to CABLE section)
3. Logo software

1.  Put ECR in Back up Receive mode in SRV.
2.  Select same baud rate as PC program.
3. You must use Channel 2 on the ECR for the data transfer.

1. The image must be a BMP type file and its size has to be 360 x 130 pixels
3.  PC Logo convert program should be set as Same Baud as ECR
4.  Protocol has to be SIO (Manual)