Read Sharp PRS PRODUCTS Service Manual online
UP-600/UP-700VPS
11
S/S#009-B:
1. Print User #2 field on “Print Card”
2. Print User #1 field on “Print Card”
3. Print Member Number on “Print
Card”
Print User #2
field on “Print
field on “Print
Card”
Print User #1
field on “Print
field on “Print
Card”
Print Member
Number on
“Print Card”
S/S#009-B
NO
NO
NO
0
YES
1
YES
NO
2
YES
3
YES
NO
NO
4
YES
5
YES
NO
6
YES
7
S/S#009-C:
1. Display User#2 field in “Display Card”
2. Display User#1 field in “Display Card”
3. Display Member No in “Display Card”
Display User
#2 field in
“Display Card”
Display User
#1 field in
“Display Card”
Display
Member No in
“Display Card”
S/S#009-C
NO
NO
NO
0
YES
1
YES
NO
2
YES
3
YES
NO
NO
4
YES
5
YES
NO
6
YES
7
S/S#009-D:
1. Preview Mode Enable
2. Compulsory card in preview mode
3. Request card if not present.
Request card if
not present
Card Compulsory
when in Preview
mode
Preview mode
enabled
S/S#009-D
NO
NO
NO
0
YES
1
YES
NO
2
YES
3
YES
NO
NO
4
YES
5
YES
NO
6
YES
7
Note:
Preview Mode : Checks if card inserted (swiped) at start
of transaction. This allows the ECR to select a price
level at this point. If card is non compulsory, it is
possible to select “Request card if not present”. In this
case the ECR will prompt “Card ?” and wait for a card to
be inserted. At this point the operator may select
ENTER, which continues without a card with price level
1 selected, CANCEL which aborts the transaction, or a
card can be inserted/swiped. If “Request card if not
present” is not selected, the ECR will automatically
continue at price level 1. Selection of price level for this
feature is in the Card Group programming.
continue at price level 1. Selection of price level for this
feature is in the Card Group programming.
[S/S#010] : MRS = 0000
S/S#010-A:
1. Independent Purse operation
2. Allow spend from cards over Group
2. Allow spend from cards over Group
Maximum Balance
Independent
purse
operation
Allow spend
from cards
over Group
Max balance
Unused
S/S#010-A
NO
NO
NO
0
YES
1
YES
NO
2
YES
3
YES
NO
NO
4
YES
5
YES
NO
6
YES
7
Note:
Allow spend from cards over maximum balance:
Normally all card operations are blocked if a card is
seen to have greater than the allowable balance as set
in PGM2 > Setting > SharpSmart > Max Balance.
Mainly applies if the maximum balance has been re-set
at a lower value.
Independent Purse operation: Allows Purse 1 and
Purse 2 to be used independently of each other.
- P1 is added to by RA2, and decremented by CR8.
- P2 is added to by RA4, and decremented by CR9.
Note: Selecting “Independent Purse” mode
automatically invokes “Refresh adds to purse 2”. To
allow “Refresh overwrites purse 2”, set S/S#008-A.
Purse 2 to be used independently of each other.
- P1 is added to by RA2, and decremented by CR8.
- P2 is added to by RA4, and decremented by CR9.
Note: Selecting “Independent Purse” mode
automatically invokes “Refresh adds to purse 2”. To
allow “Refresh overwrites purse 2”, set S/S#008-A.
S/S#010-B:
Not Used
Click on the first or last page to see other PRS PRODUCTS service manuals if exist.