GENERAL (serv.man27). User Manual - Sharp ECR User Guide / Operation Manual. Page 22

21

It will also install icons for the utilities such as the Client Configurator, which you can use for
resetting your options.

Note: Set-up will also create an "UNINSTALL" icon, which reverses any changes that are
made during installation.  You can run this at any stage to return your workstation to its
previous state.

If you have elected to install a Client, Set-up will make the required amendments to your
System.INI and or registry, to load the Client as Windows initialises.  NetSupport will not
replace any of your existing Drivers.

Specify your Licence Details
You will also be prompted for your licence details at this point. The details required for your
licence are supplied on the envelope your CD came in. If you are using NetSupport as an
evaluation, simply enter EVAL in the Licensee name field and leave all other fields unchanged.
Note: All entries on the licensing form are cAsE sEnSiTiVe.

Choosing a Client Configurator
You will then be prompted to run the NetSupport Configurator to set up the Client and install
options such as Remote Communications.

If you choose NO, the Client will be installed with the default setting to use TCP/IP protocol.

Choosing Network Transports
If you choose YES, you will be given the opportunity to select your protocol, set-up Remote
Communications, Audio Settings and other basic options.

Completing the Installation Process
NetSupport Manager has now been successfully installed. Remove the NetSupport CD and
choose to restart your workstation to use NetSupport.