Read Sharp ER-A610 (serv.man23) Technical Bulletin online
2/5
4. Action:
((For the field))
Either of the following two countermeasures should be taken against the above 3-1).
1) The following should be set in case a code beginning with 200 in an EAN 8 CODE is not
treated as a PLU.
Key sequence
PGM2 MODE
2616 [
•
] [ X ] 13 [ X ]
∗∗
0001
∗∗
[ ST ] [ TL ]
∗
Input your selected data.
(Refer to page 46 in the PROGRAMMING MANUAL for ER-A610.)
2) The following SSP should be issued in case a code beginning with 200 in an EAN 8
CODE is treated as a PLU.
SSPERA610-002 Model applicable: ER-A610
(ROM VERSION NO. RAI1A & RAI1B)
Note) ER-A570, without this function, requires no countermeasure.
The following SSP should be issued against the above 3-2).
SSPERA610-003 Model applicable: ER-A610
(ROM VERSION NO. RAI1A & RAI1B)
SSPERA570-003 Model applicable: ER-A570
(ROM VERSION NO. RAJ1A & RAJ1B)
((For production))
Simultaneous correction will be carried out when a ROM VERSION change is required.
5. Remarks:
Special Service Preset Setting Data and order
SSPERA610-002
SSPERA610-003
SSPERA570-003
Click on the first or last page to see other ER-A610 (serv.man23) service manuals if exist.