ER-A610 (serv.man23). Paper End Sensor, Scanning Problem - Sharp ECR Technical Bulletin (repair manual)

er-a610 (serv.man23) technical bulletin
Model
ER-A610 (serv.man23)
Pages
5 Few pages! See other manuals at the bottom of the first or last page.
Size
48.35 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
ECR / Paper End Sensor, Scanning Problem
File
er-a610-sm23.pdf
Date

Read Sharp ER-A610 (serv.man23) Technical Bulletin online

SSP FOR CHANGING THE SOFTWARE FOR THE EAN
SPECIFICATION AND THE PAPER NEAR-END SENSOR
SPECIFICATION
 [Parts changes]
1. Model name:
ER-A570/A610
2. General:
The software for the EAN specification and the paper near-end sensor specification has be
changed.
3. Description:
1) Change to the software for the EAN specification
<Phenomenon>
Registration of the following EAN code can not be performed by showing "ENTRY ERROR".
EAN CODE:  3219820000368
<Fault condition>
In the specification an EAN CODE of 8 digits beginning with 200 is treated as a PLU 
and the digits from 6 to 8 in the EAN CODE of 13 digits is 200
   ∗
1:  Refer to page 46 in the PROGRAMMING MANUAL for ER-A610.
   (In case of PGM JOB#2616 X=13 F=0)
   ∗
2:  EAN CODE:  3219820000368
                                           To be 200 from the 6th to the 8th digit
<Description of the change>
The improvement will be carried out so that correct registration can be performed even with
the wrong EAN CODE inputted as shown above.
2) Change to the software for the paper near-end sensor specification
<Phenomenon>
When the paper runs out on the ER-A610 or ER-A570 connected with an optional paper
near-end sensor the "PAPER EMPTY" error does not occur.
<Description of the change>
The improvement has been carried out so as to solve the above condition.
1
2
1/5
Date :
Model :
Ref :
Colour Code :
Page 1 
1st September 1995
ERA610
A610-005
White
ELECTRONIC CASH REGISTER
TECHNICAL BULLETIN
Sharp Electronics (UK) Ltd, Technical Support Group
Originators Initials_____________ Supervisors Initials_____________ Approval Date____________
2/5
4. Action:
((For the field))
  Either of the following two countermeasures should be taken against the above 3-1).
  1) The following should be set in case  a code beginning with 200 in an EAN 8 CODE is not
treated as a PLU.
Key sequence
  PGM2 MODE
             2616 [ 
• 
] [ X ] 13 [ X ] 
∗∗
0001
∗∗
 [ ST ]  [ TL ]
                  
 Input your selected data.
                    (Refer to page 46 in the PROGRAMMING MANUAL for ER-A610.)
  2) The following SSP should be issued in case a code beginning with 200 in an EAN 8
CODE is treated as a PLU.
SSPERA610-002   Model applicable:  ER-A610
(ROM VERSION NO. RAI1A & RAI1B)
Note) ER-A570, without this function, requires no countermeasure.
  The following SSP should be issued against the above 3-2).
SSPERA610-003   Model applicable:  ER-A610
(ROM VERSION NO. RAI1A & RAI1B)
SSPERA570-003   Model applicable:  ER-A570
(ROM VERSION NO. RAJ1A & RAJ1B)
((For production))
  Simultaneous correction will be carried out when a ROM VERSION change is required.
5. Remarks:
 Special Service Preset Setting Data and order
                             SSPERA610-002
                             SSPERA610-003
                             SSPERA570-003
Special Service Preset Setting Order
1) Input 130 
 TL in the SRV MODE, and confirm the ROM version number. 
2) Set the SSP by the SSP Setting Data in the attached sheet.
3) Check the printed receipt by comparing it with the SSP Setting Data.
4) In case any error is found, the corresponding SSP data should be corrected by the following key sequence.
991 
 [
 •
 ] 
 [ X ] 
 XXX 
 YYY 
 [ ST ] 
 [ TL ]
                                      XXX:  STEP NUMBER   YYY:  SSP DATA
5) Turn off and on the machine by pulling out and inserting the AC plug.
Print example:
130
  S-ROM     27040RAJ1A
The underlined part shows the ROM version number.
(In this example, the ROM number is RAJ1A.)
3/5
4/5
Page of 5
Display

Download Sharp ER-A610 (serv.man23) Technical Bulletin

Here you can read online and download Sharp ER-A610 (serv.man23) Technical Bulletin in PDF. ER-A610 (serv.man23) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp ER-A610 (serv.man23) ECR. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.