Read Sharp ER-A490 (serv.man4) Service Manual online
#918-D:
1. Tip paid includes Cash Tip
2. Clering of Tip totalizer at cashier Z1 report
3. Printing of Tip totalizer on the cashier report
2. Clering of Tip totalizer at cashier Z1 report
3. Printing of Tip totalizer on the cashier report
1. Tip paid
includes
Cash Tip
Cash Tip
2. Clering of
Tip totalizer
at cashier
Z1 report
at cashier
Z1 report
3. Printing of
Tip
totalizer on
the cashier
report
totalizer on
the cashier
report
918-D
Yes
No
No
0
★
Yes
1
Yes
No
2
Yes
3
No
No
No
4
Yes
5
Yes
No
6
Yes
7
[JOB#926] MRS = 0004
#926-A:
1. Sending "Last void data" on KP
2. Sending "Past void data" on KP
2. Sending "Past void data" on KP
1. Sending "Last void
data" on KP
2. Sending "Past void
data" on KP
926-A
Yes
Yes
0
★
No
1
No
Yes
2
No
3
#926-B:
1. Program reset at PGM2 mode
2. Sending "Refund data" on KP
2. Sending "Refund data" on KP
1. Program reset at
PGM2 mode
2. Sending "Refund
data" on KP
926-B
Disable
Yes
0
★
No
2
Enable
Yes
4
No
6
#926-C: Not used (Fixed at "0")
#926-D:
1. DEPT/PLU text printing
2. Check VP format
2. Check VP format
1. DEPT/PLU text
printing
2. Check VP
926-D
Normal
Normal
0
Euro check
1
French check
2
German check
3
Double
Normal
4
★
Euro check
5
French check
6
German check
7
[JOB#946] MRS = 0000
#946-A: 1. Not used
#946-B: 1. Channel No. for Kitchen printer = 0 to 7
#946-C, D: Not used (Fixed at "00")
*
When channel No. for online is zero, online system is nothing.
*
Do not select the same channel No. for two or more devices.
*
Use the switches on the I/F board to set the channel No. for the I/F
board connector. (Refer to the RS-232 channel setting in III.
HARDWARE DESCRIPTION FOR ER-A5RS.)
board connector. (Refer to the RS-232 channel setting in III.
HARDWARE DESCRIPTION FOR ER-A5RS.)
[JOB#971]
Cleat the "KP BUFFER" file for Kitchen printer.
Refer to the PROGRAMMING MANUAL for ER-A490.
Refer to the PROGRAMMING MANUAL for ER-A490.
2) PGM programming
[JOB#2118] MRS = 01
Print station programming
XX: DEPT. code = 01 - 50
A:
KP of RS232
A
No output
0
Output
1
B, C: Not used (Fixed at "00")
D:
Printing on receipt
D
No
0
Yes
1
MRS = 0001
[JOB#2218] MRS = 01
Print station programming
XXXXXX: PLU code = 1 - 999999
A:
KP of RS232
A
No output
0
Output
1
B, C: Not used (Fixed at "00")
D:
Printing on receipt
D
No
0
Yes
1
If the record of entred PLU code is not in PLU file at this program-
ming, it will be created in PLU file.
ming, it will be created in PLU file.
MRS = 0001
[JOB#6412] MRS = 3
Programming of the transmission data baud rate
#6412-A: 1. Baud rate
2118
XX
x
ABCD
No change
x
ST
TL
CL
Display code & code entry
For next code
2118
XXXXXX
x
ABCD
No change
ST
TL
CL
Display code & code entry
For next code
x
PLU code
6412
A
0
x
TL
1 – 18
Click on the first or last page to see other ER-A490 (serv.man4) service manuals if exist.