DV-SV80H (serv.man2) - Sharp DVD User Guide / Operation Manual. Page 28

- 27 -

EN

AUDIO CD PLAYBACK

Preparations
• Press on the power button of your audio system if the

player has been connected to an audio system.
Basic Play
1. Press the OPERATE button
2. Press OPEN/CLOSE to open the disc tray.
3. Place a disc onto the tray
Hold the disc without touching either of its surfaces, position

it with the printed title side facing up, align it with the guides,

and place it in its proper position.
4.  Press OPEN/CLOSE.
Play is commenced.
After operation
When the unit is not in use, remove the disc and press

OPERATE to turn the unit off.

NOTE:
• If the disc is placed upside down (and it is a single sided

disc), the VFD display on the player will indicate NO DISC.

For your reference:
• When “

” symbol appears while a button is being

operated, it means that the player prohibits the

corresponding operation.
Stopping Play
Press stop twice.
For your convenience:
• When STOP is pressed once, while the play continues,

the unit records the point where the play stopped and if

the PLAY key is pressed, play resumes from the point

where STOP key was pressed. Press PLAY / PAUSE

again, and play will resume from this point. When the tray

is opened or the STOP is pressed again, the RESUME

function will be cleared.
• To stop the play permanently, press STOP twice. When

the STOP button is pressed for the first time, a message

“PRESS SELECT TO CONTINUE” will appear on the screen

to remind you if you want to continue the play. To stop the

play, press the STOP button again or you can press PLAY/

PAUSE to continue.

Rapid Advance / Rapid Reverse

Press SLOW/SEARCH (

 Fast reverse or 

 Fast

forward) on the remote control or Search 

 or 

on the main unit during play.

• The speed of advance (

 2x, 

 4x,  

 8x, 

 16x,

 32x) or reverse (

 2x, 

 4x, 

 8x, 

 16x, 

32x) changes for every press of the 

  or 

 button.

You can also resume normal play using these buttons.
• Normal play is resumed when the SELECT button is

pressed or  PLAY/PAUSE button is pressed again.

NOTE:
No sound will be heard during rapid advance or

rapid reverse.

Skipping Ahead or Back to Tracks
Skipping ahead

Press SKIP/ FRAME 

 (Next) on the remote control

or SKIP 

 on the main unit during play.

A track is skipped each time the button is pressed.
Skipping back

Press SKIP/ FRAME 

 (Previous) on the remote

control or SKIP 

 on the main unit during play.

When it is pressed again, a track is skipped.
PAUSE
Press PLAY/PAUSE once during play.
The play suspends.
To return to normal play press PLAY/PAUSE again.

Direct Selection of Tracks

Selecting by Time
You can play the audio CD starting from any time point you

want.
Press SEARCH MODE on the remote control once

time during playback.
The time search box is displayed on the screen as  DISC

GOTO:_: _ _ : _ _
Player goes to entered time of the disc.
Press SEARCH MODE on the remote control two

times during playback.
The time search box is displayed on the screen as  TRACK

GOTO:_: _ _ : _ _
Player goes to entered time of the current track.
Press SEARCH MODE on the remote control three

times during playback.
The time search box is displayed on the screen as  SELECT

TRACK :_ _ / _ _
Player goes to entered track of the disc.
Enter the time using number buttons.