DV-RW260H (serv.man5) - Sharp DVD User Guide / Operation Manual. Page 77

The playback unit can be a camcorder or a video recorder. Check each unit’s operation manual for playback
operation. A copy protected video or DVD disc cannot be copied.

To playback unit

Recording unit

A/V-cable (not supplied)

Press INPUT SELECT on the remote con-
trol repeatedly until A3 appears on the front
display.
If the other VCR or camcorder is equipped
using an S-Video output, a superior picture
will be achieved using an S-Video cable
connected to the S-Video-input (AV3) on the
front panel with an S-Video cable. For this
to work, you must select “S-VIDEO” mode
in AV3 INPUT-setting on page 26.
If you select “VIDEO”, only the composite
video signal will be input. (S-Video input sig-
nal will be cut.)
The S-Video input can be used only for re-
cording on the disc. (The S-Video input can-
not be used for recording on the video tape.)

To playback unit

Scart cable
(not supplied)

Scart cable
(supplied)

TV-unit (not supplied)

Press INPUT SELECT on the remote
control repeatedly until A2 appears on the
front display.

Recording unit

S-Video cable (not supplied)

  2H00701A[E] P68-77

5/14/05, 9:17 AM

77