DV-RW260H (serv.man5) - Sharp DVD User Guide / Operation Manual. Page 76

You can connect another VCR or
camcorder for dubbing.
Typical connection: When using this
unit as a recording device
See next page for more information
on connection diagrams.

•  Turn ON the TV and switch the TV to it’s AV channel (this may be

labelled EXT / AUX etc.)

•  Load a video tape where the erase-protection tab is not activated or

a disc with enough recording space.

•  To record onto a video tape, set the unit to VCR mode, whereas to

record onto a disc, set it to DVD mode.

1

Press INPUT SELECT and set the channel to A3 (A1or A2).
A1: TV scart (audio/video input and audio/video output) on the

rear panel

A2: DECODER/EXTERNAL (audio/video input and audio/video

output) scart on the rear panel

A3: AUDIO/VIDEO input on the front panel Confirm that A3 (A1or

A2) appears on the display window.

2

Press REC MODE/SPEED and select the recording mode.
VCR: SP or LP (See page 46.)
DVD: SP, LP, SLP or XP (See page 50.)

3

Press   REC/OTR on this unit, then press PAUSE/STILL.

4

Press the PLAY button on the playback device, then press the
PAUSE/STILL button.

5

Release the recording pause and the playback still simultaneously
to begin the duplicating process.

6

To stop dubbing, press STOP.

NOTES:
• INPUT SELECT  does not work

when DVD or VCR is playing or
recording.

• When this unit is used as a play-

back device, any on screen dis-
plays that appear would also ap-
pear on the recording.
However it is possible to set the on
screen display to OFF - see the
“DISPLAY/CALL” section on page
25 for more information.

• If no special permission is obtained

from the copyright owner, videos
recorded from TV programs or
movies can only be used for your
own personal enjoyment.

• You may not dub a copy protected

video tape or DVD disc.

  2H00701A[E] P68-77

5/14/05, 9:17 AM

76