DV-RW260H (serv.man5) - Sharp DVD User Guide / Operation Manual. Page 19

Plug your unit into the mains supply. The unit will
start to automatically tune in and set the correct time
and date. When auto tuning is complete, you must
switch the TV to it's AV channel.
AUTOMATIC SETUP IS ONLY AVAILABLE WHEN
YOU PLUG THE UNIT IN FOR THE FIRST TIME.

Preparation:
• Make sure that your unit is properly connected to

the TV.

• If a satellite receiver is connected with the coaxial

lead, make sure it’s switched ON and set to SKY
ONE.

• Turn ON the TV and switch the TV to it's AV

channel (this may be labelled EXT / AUX etc.).

OPERATE

1

Plug your unit into the
mains supply. “Auto”
will start to flash on the
unit display, and also
“AUTO TUNING” will
be displayed on the TV
screen. Your unit will
automatically tune
itself in and set the
correct time and date.
(This may take approx. 4 minutes.)

2

Press 

 OPERATE to turn OFF the unit. The

broadcast stations received will be tuned on your
unit.

NOTES:
• The unit automatically corrects the clock setting

every hour and automatically adjusts the clock
setting for Daylight Saving Time.

• Your unit will tune the TV stations as follows.

CH 1

BBC 1

CH 5

Channel 5

CH 2

BBC 2

CH 6

Satellite

CH 3

ITV

CH 7

etc.

CH 4

Channel 4

• Some broadcasts may not be preset correctly by

the automatic tuning system. In this case, you can
preset the broadcast stations manually, and you can
replace the channel positions as you like (See page
30).

  2H00701A[E] P19-30

5/14/05, 9:14 AM

19