DV-RW260H (serv.man5) - Sharp DVD User Guide / Operation Manual. Page 18

TV

TV

Coaxial digital cable (not supplied)

AV Amplifier with
built-in various
decoder as above

VCR/DVD

To Audio (L) Input
To Audio (R) Input

AUDIO cable (not supplied)

Stereo Amplifier

VCR/DVD

Audio (R) Output

SCART-cable (supplied)

Audio (L) Output

Coaxial digital
Audio Output

To SCART
input

SCART-cable (supplied)

To SCART
input

TV Scart socket (AV1)

If your VCR/DVD is connected to a stereo amplifier, the video soundtrack can output through the loudspeakers of
a stereo system.

If you are using an Amplifier with a built-in digital surround as listed can enjoy the various audio systems such as
Dolby Digital and DTS by using the Coaxial Digital Output.

NOTES:
• The COAXIAL jack only outputs the audio from DVD mode.

The VHS signal is only output from the SCART-sockets and AUDIO L/R jacks.

• Before you make the above connections, set DOLBY DIGITAL to DOLBY DIGITAL "OFF" or DTS to "OFF" on the

AV Amplifier, otherwise a loud noise will suddenly come out from the speakers, affecting your ears or cause the
speakers to be damaged. After the unit is connected, you can turn on DOLBY DIGITAL or DTS.

• DTS audio is only output via the COAXIAL output jack. You therefore need to connect this unit to a suitable DTS

decoder in order to hear the audio from DTS discs.
When playing DTS-encoded CDs, only noise will be heard from the speakers or analog stereo outputs.

• Some DTS decoders which do not support DVD-DTS interface may not work properly on the unit.

TV Scart socket (AV1)

  2H00701A[E] P12-18

5/14/05, 9:14 AM

18