DV-RW250H (serv.man14) - Sharp DVD User Guide / Operation Manual. Page 80

• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.

• Antenna connection is not correct or antenna cable is discon-

nected.

• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to

VIDEO (or equivalent).

• Channel is set to the external mode.

• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.

• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 metres or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.

• Press OPERATE button on the unit approx. 10sec. to reset.

VCR/DVD does not operate.

No picture.

No sound.

The remote control does not func-
tion.

No function in DVD mode.

–
–
–
–

30

16

16

–

–

16~18

–

33, 46

15

–

• Your preferred language may not be available on the disc.

• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.

• Some discs may not do some of the functions.

• Check the disc space, using the disc information.
• Check the disc for protection.
• Check if the video to be recorded is not “copy-guarded”.
• Check that the number of recorded titles is 99 or less, using the

disc information.

• Check that the total number of chapters for the recorded titles

does not exceed 999 in the disc information section.

• In a DVD-RW of Ver.1.0, recording in Video mode does not work.

Check the disc type.

• Check that the disc is finalised.
• Some DVD players will not play even if the disc has been

finalised.

• If the disc was recorded in VR mode, the other player must be

RW compatible in order to play the disc.

Display is not shown in your lan-
guage.

Playback doesn’t start.

Stopping playback, search, slow-
motion play, repeat play, or program
play, etc. cannot be performed.

Recording Does not work.

A disc recorded using this recorder
cannot be played back in other
players.

20

30

9
9

–

32
23
49

32, 48

32, 48

10

23

11, 23

11, 23

The following conditions do not always denote trouble. Therefore, perform the checks described below before calling for
service. If the problem cannot be corrected by the use of this guide, remove the main plugs from the wall socket, and
contact the dealer or supplier from whom the unit was purchased in order to obtain service. Where this is not possible
please visit our web-site www.sharp.co.uk/customersupport.
Customers without Internet access may telephone 08705 274277 during office hours (or (01) 6760648 if telephoning from Ireland),

Certain replacement parts and accessories may be obtained from our main parts distributor, who can be contacted on the
following numbers:

WILLOW VALE ELECTRONICS LTD.:

0121 766 5414

In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of the
date of purchase to the repairing company. Please keep your invoice or receipt, which is supplied at the time of purchase.

  2D50901A P76-BACK

7/20/04, 12:25 PM

80