DV-RW250H (serv.man14) - Sharp DVD User Guide / Operation Manual. Page 75

Read Sharp DV-RW250H (serv.man14) User Guide / Operation Manual online

75
Dubbing using other equipment
Playback unit connection.
The playback unit can be a camcorder or a video recorder. See each operation manual for each playback
operation. The copy protected video or DVD disc cannot be copied.
Dubbing with A/V-cable (or S-Video cable) (not supplied)
To playback unit
Recording unit
A/V-cable (not supplied)
Press INPUT SELECT on the remote con-
trol repeatedly until A3 appears on the front
display.
If the other VCR or camcorder is equipped
with S-Video output, a superior picture will
be achieved using an S-Video cable
connected to the S-Video-input (AV3) on the
front panel with S-Video cable. In this case,
you must select “S-VIDEO” mode in AV3 IN-
PUT-setting on page 25.
If you select “VIDEO”, only the composite
video signal will be input. (S-Video input sig-
nal will be cut.)
The S-Video input can be used only for re-
cording on the disc. (The S-Video input can-
not be used for recording on the video tape.)
To playback unit
Scart cable
(not supplied)
Scart cable
(supplied)
TV-unit (not supplied)
Dubbing with scart cable (not supplied)
Press INPUT SELECT on the remote
control repeatedly until A2 appears on the
front display.
Recording unit
S-Video cable (not supplied)
  2D50901A P66-75
7/20/04, 12:25 PM
75
Page of 84
Display

Click on the first or last page to see other DV-RW250H (serv.man14) service manuals if exist.