Read Sharp DV-NC55 (serv.man50) User Guide / Operation Manual online
22
Web-site:www.sharp.co.uk/support Help line:08705 274277 (office hours)
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/
DTS/MPEG Audio surround processor to your Unit’s coaxial digital jack provides richer and more powerful
audio play.
DTS/MPEG Audio surround processor to your Unit’s coaxial digital jack provides richer and more powerful
audio play.
• This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial
digital input jack.
■ Connection to a processor or amplifier with a coaxial digital input jack
DIGITAL IN
COAXIAL
LINE 1(TV)
VIDEO
S-VIDEO
RGB
LINE 2
S-VIDEO
OUTPUT SELECTOR
DIGITAL
AUDIO
DVD OUT
AUDIO
L
R
VIDEO
VCR/DVD OUT
AUDIO
L
R
ANTENNA
OUT
IN
Required lead
Coaxial digital lead (commercially available)
To coaxial
DIGITAL OUT jack
DIGITAL OUT jack
To coaxial
digital input jack
digital input jack
Coaxial digital lead
(commercially available)
(commercially available)
You can make this connection
using either a coaxial digital
using either a coaxial digital
lead
.
This Unit
Audio equipment
DVD Audio Connections
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs such as these is
digitally recorded by connecting the Unit directly to a digital recorder (such as an MD player), the music may be
recorded continuously and track numbers may be lost.
digitally recorded by connecting the Unit directly to a digital recorder (such as an MD player), the music may be
recorded continuously and track numbers may be lost.
■ Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio CD
• Audio CD
Play the disc as you normally would, with the audio mode set to “L+R” (see page 84). With a digital
connection, audio of a disc recorded with DTS sounds abnormal in this case.
connection, audio of a disc recorded with DTS sounds abnormal in this case.
• DVD
With a digital connection, audio cannot be produced from a DVD recorded with Dolby Digital (5.1 channel),
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
Dolby Surround (Pro Logic), DTS or MPEG Audio, so you should use an analogue connection to play such
discs. Discs with linear PCM audio should play normally.
DVNC60H(E)#018_024.pm6
19/09/2001, 10:35
22
Click on the first or last page to see other DV-NC55 (serv.man50) service manuals if exist.