Read Sharp DV-HR300H (serv.man27) Technical Bulletin online
DVD 2005 07 01
Date of Issue: 20
th
December 2005
Classification:
White
DVD/HHD RECORDER TECHNICAL BULLETIN
Page 2 of 4
Sharp Electronics (UK) Limited
Reference - AvW 10 07 2005 - 1
Revision - 2
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
Flash Software Updates
Version
Number
Number
Release Date
Reason
1.09
28
th
April 2004
Timer recording is not executed.
After first timer recording, the next timer entry is
cancelled.
After first timer recording, the next timer entry is
cancelled.
1.10
1
st
October 2004
Aspect ratio is deformed during time shift recording.
Picture pauses after 2 to 3 seconds when playing
back from title list with timer on.
Only first chapter is dubbed, even though multiple
chapters are selected during chapter dubbing.
LCD backlight functionality during timer recording
improved.
Delayed starting of timer recordings.
Picture pauses after 2 to 3 seconds when playing
back from title list with timer on.
Only first chapter is dubbed, even though multiple
chapters are selected during chapter dubbing.
LCD backlight functionality during timer recording
improved.
Delayed starting of timer recordings.
1.20
11
th
March 2005
RGB and Y/C colour is not outputted correctly.
Blue screen not cancelling
If the dubbing destination drive is full, error message
is not displayed.
After HDD timer recording, can not start the timer
record in DVD mode.
If the timer is set for a period longer than 12 hours,
the message 'error in hard disc' appears.
During low power timer standby, the bypass signal
from L1 to L2 disappears after 6 seconds.
Poor key response in low power timer standby.
Vertical blanking interval too short.
Blue screen not cancelling
If the dubbing destination drive is full, error message
is not displayed.
After HDD timer recording, can not start the timer
record in DVD mode.
If the timer is set for a period longer than 12 hours,
the message 'error in hard disc' appears.
During low power timer standby, the bypass signal
from L1 to L2 disappears after 6 seconds.
Poor key response in low power timer standby.
Vertical blanking interval too short.
Note
The Flash software must be updated to the latest version. The latest version will
encompass all the previous updates.
The Flash software must be updated to the latest version. The latest version will
encompass all the previous updates.
Click on the first or last page to see other DV-HR300H (serv.man27) service manuals if exist.