Read Sharp DV-740 (serv.man21) User Guide / Operation Manual online
- 26 -
ADVANCED OPERATION OF PLAYBACK
<
REPEATED Playback
l
TITLE/CHAPTER Repeat
When the
REPEAT
button is pressed, the repeated
playback is triggered and the OSD message is
changed in cycles of “CHAPTER REPEAT ON”,
“TITLE REPEAT ON”, and “REPEAT OFF.”
changed in cycles of “CHAPTER REPEAT ON”,
“TITLE REPEAT ON”, and “REPEAT OFF.”
?
CHAPTER REPEAT
Enables the repeated playback of a chapter for a DVD
disc or track for a Audio CD disc or a VCD disc.
disc or track for a Audio CD disc or a VCD disc.
?
TITLE REPEAT
Enables the repeated playback of a title for a DVD disc
or a disc for a Audio CD disc or a VCD disc.
or a disc for a Audio CD disc or a VCD disc.
?
REPEAT OFF
Resumes normal play.
l
A-B Repeat
You are able to perform a repeated playback between
any two points of a track or a chapter.
any two points of a track or a chapter.
1. Press the
A-B REPEAT
button during playback to set the
beginning point (A). The OSD message “A TO B SET
A “ will be shown on the right lower screen corner.
A “ will be shown on the right lower screen corner.
2. Press the
A-B REPEAT
button again to set the end point
(B). The OSD message “A TO B SET B ” will be shown.
In the meantime, the repeated playback begins
between the two points, A and B.
In the meantime, the repeated playback begins
between the two points, A and B.
3. Pressing the
A-B REPEAT
button again resumes normal
play. The OSD message “A TO B CANCELLED” will
be shown.
be shown.
SET A
SET B
<
PROGRAM Playback
Here the program playback function is only available for
Audio CD, or a VCD with PBC off.
Audio CD, or a VCD with PBC off.
l
Track Program
1. Press the
PROGRAM
button to program the tracks for
program playback during STOP status.
2. Use the numbers on the remote control to begin
programming. Press the corresponding track number
in the same sequence as your desired playback order.
in the same sequence as your desired playback order.
For example:
To program tracks 2, 4, 6 (in the same order), simply
press key digits
press key digits
2
, digit
4
, digit
6
sequentially.
Set track 2 as first sequence
Set track 4 as second sequence
?
A number larger than 10 must be keyed by using
+10
additionally. For example, “22” is keyed in by pressing
+10
twice and then
2
once.
NOTES:
i
The maximum program capability is 99 tracks.
l
Start/Cancel the Program Playback
?
Press the
PLAY
button to start the program playback in
the order that you programmed it.
?
Press the
STOP
button to stop playback, press
PROGRAM
to
reset program order, press
PROGRAM
again to cancel the program function.
?
During the program playback, the
SKIP
:
button and
the 9
SKIP
button can be used to advance to the next
programmed track or go back to the previous
programmed track.
programmed track.
CHAPTER REPEAT ON
TITLE REPEAT ON
A TO B SET A
A TO B SET B
PROGRAM P01: 02
PROGRAM P02: 04
PROGRAM P00: 00
Click on the first or last page to see other DV-740 (serv.man21) service manuals if exist.