XL-UR5H - Sharp Audio User Guide / Operation Manual. Page 52

XL-UR5H

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.

„ General

 

„ CD player

„ Cassette deck

„ Remote control

„ Tuner

z The clock is not set to the 

correct time.

z Did a power failure occur? Reset 

the clock. 

z When a button is pressed, 

the unit does not respond.

z Set the unit to the power stand-

by mode and then turn it back on.

z If the unit still malfunctions, reset 

it. 

z No sound is heard.

z Is the volume level set to “0”?
z Are the headphones connected?
z Are the speaker wires discon-

nected?

z Playback does not start.

z Is the disc loaded upside down?

z Playback stops in the 

middle or is not performed 
properly.

z Does the disc satisfy the 

standards?

z Is the disc distorted or 

scratched?

z Playback sounds are 

skipped, or stopped in the 
middle of a track.

z Is the unit located near excessive 

vibrations?

z Is the disc very dirty?
z Has condensation formed inside 

the unit?

z Cannot record.

z Is the erase-prevention tab re-

moved?

z Cannot record tracks with

proper sound quality.

z Cannot erase completely.

z Is it a normal tape? (You cannot 

record on a metal or CrO

2 

tape.)

z Sound skipping.

z Is there slack in the tape?

z Cannot hear treble.

z Is the tape stretched?

z Sound fluctuation.

z Are the capstan, pinch roller, or 

head dirty?

z The remote control does 

not operate.

z Is the AC power lead of the unit 

plugged in?

z Is the battery polarity correct?
z Are the batteries dead?
z Is the distance or angle 

incorrect?

z Does the remote control sensor 

receive strong light?

z The radio makes unusual 

noises continuously.

z Is the unit placed near the TV or 

computer?

z Is the FM aerial or AM loop aerial 

placed properly? Move the aerial 
away from the AC power lead if 
it's located nearby.