Read Sharp XL-S10H (serv.man2) User Guide / Operation Manual online
03/10/28
XL-S10H_E_3.fm
22
TINSEA001SJZZ
XL-S10H
Ad
v
a
n
ced Fea
tures
Timer and sleep operation (continued)
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Perform "Timer playback" from the beginning.
Sleep operation
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SLEEP button until "OFF" appears on the
display.
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the
stand-by mode, press the SLEEP button until "OFF" appears on the
display.
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
You can play back the same source only (the function cannot be
switched).
7
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the volume
you were listening at before your system enters the timer stand-
by mode.
you were listening at before your system enters the timer stand-
by mode.
8
The unit will enter the stand-by mode one hour after the
timer playback starts. However, when CD playback time is
one hour or less, it will enter the stand-by mode after com-
pleting playback.
timer playback starts. However, when CD playback time is
one hour or less, it will enter the stand-by mode after com-
pleting playback.
1
Play back the desired sound source.
2
Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep
time. The time will decrease as follows.
time. The time will decrease as follows.
The amount of sleep time can also be changed whilst in the
sleep mode.
sleep mode.
3
Your system will enter the power stand-by mode automat-
ically after the preset time has elapsed.
ically after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
eration finishes.
3:00
2:00
OFF
15
30
1:30
10
5
1:00
1
Set the sleep time (steps 1 - 2, page 22).
2
Whilst the sleep timer is set, set the timer playback start
time (steps 4 - 6, page 21).
time (steps 4 - 6, page 21).
1.Sleep timer setting
2.Timer playback setting
2.Timer playback setting
Timer playback
start time
start time
5 minutes - 3 hours
Sleep operation will
automatically stop.
automatically stop.
Click on the first or last page to see other XL-S10H (serv.man2) service manuals if exist.