Read Sharp XL-MP8H (serv.man2) User Guide / Operation Manual online
05/6/10
XL-MP8H(E)2.fm
18
TINSZA056SJZZ
XL-MP8H
Radio
Listening to the memorised station
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Notes:
z
On the remote control, press the SHIFT button and then the
MEMORY button in step 2 and 4.
MEMORY button in step 2 and 4.
z
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead dis-
connection.
hours should there be a power failure or the AC power lead dis-
connection.
To recall a memorised station
Move the operation lever toward PRESET or PRESET for less
than 0.5 seconds to select the desired station.
than 0.5 seconds to select the desired station.
To select a preset station with the direct number buttons:
Press the corresponding number ("0" - "+10").
Press the corresponding number ("0" - "+10").
Example:
To select 28, press "+10", "+10" and "8".
To select 28, press "+10", "+10" and "8".
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
To clear a memorised station
To erase entire preset memory
1
Perform steps 1 - 3 in "Listening to the radio" on page 17.
2
Press the MEMORY/SET button to
enter the preset tuning saving
mode.
enter the preset tuning saving
mode.
3
Within 5 seconds, move the opera-
tion lever toward PRESET or
PRESET to select the preset
channel number.
tion lever toward PRESET or
PRESET to select the preset
channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 5 seconds, press the MEM-
ORY/SET button to store that sta-
tion in memory.
ORY/SET button to store that sta-
tion in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
1
Move the operation lever toward PRESET or PRESET for
more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Move the operation lever toward PRESET or PRESET again
when the desired station is located.
when the desired station is located.
1
Recall the memorised station.
2
Whilst it is displayed, press the MEMORY/SET button.
z
On the remote control, press the SHIFT button and then the
MEMORY button.
MEMORY button.
3
Within 5 seconds, press the CLEAR button.
z
On the remote control, press the SHIFT button and then the
CLEAR button.
CLEAR button.
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Whilst pressing down the MEMORY/SET button and move the
operation lever toward PRESET , press the ON/STAND-BY
button until "TUCL" appears.
operation lever toward PRESET , press the ON/STAND-BY
button until "TUCL" appears.
5
Click on the first or last page to see other XL-MP8H (serv.man2) service manuals if exist.