Read Sharp XL-MP8H (serv.man2) User Guide / Operation Manual online
05/6/10
XL-MP8H(E)2.fm
17
TINSZA056SJZZ
XL-MP8H
Radio
Listening to the radio
You can use buttons on the remote control instead of the operation
lever.
Notes:
z
When radio interference occurs, auto scan tuning may stop auto-
matically at that point.
matically at that point.
z
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the FUNCTION button to display the "ST" indicator.
Press the FUNCTION button to display the "ST" indicator.
z
" " will appear when an FM broadcast is in stereo.
z
If the FM reception is weak, press the FUNCTION button to extin-
guish the "ST" indicator. The reception changes to monaural, and
the sound becomes clearer.
guish the "ST" indicator. The reception changes to monaural, and
the sound becomes clearer.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "FM" or "AM" appears on
the display.
the display.
When operating with the remote control, press the TUNER
(BAND) button to select "FM" or "AM".
(BAND) button to select "FM" or "AM".
3
Press the TUNING ( or ) button to tune in to the desired
station.
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
FM stereo receiving indicator
FM stereo mode indicator
Click on the first or last page to see other XL-MP8H (serv.man2) service manuals if exist.