Read Sharp XL-MP35H (serv.man2) User Guide / Operation Manual online
03/8/20
XL-MP35H(E)1.fm
9
XL-MP35H
TINSE0144SJZZ
Pre
p
aration
for Use
! Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
" Placing the aerial on the unit or near the AC power lead may
" Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
reception.
" Do not connect the attached FM aerial to an external aerial as
this may cause trouble.
Installing the AM loop aerial:
! Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
plain wire to the plus (+) terminal.
Caution:
Placing the speaker system:
There is no distinction between the right and the left speakers.
There is no distinction between the right and the left speakers.
Note:
The speaker grilles are not removable.
The speaker grilles are not removable.
! Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
< Assembling >
< Attaching to the wall >
Wall
Screws
(not
supplied)
" Use speakers with an impedance of 4 ohms
or more, as lower impedance speakers can
damage the unit.
damage the unit.
" Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
Incorrect
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Click on the first or last page to see other XL-MP35H (serv.man2) service manuals if exist.