Read Sharp XL-MP35H (serv.man2) User Guide / Operation Manual online
03/8/20
XL-MP35H(E)2.fm
11
XL-MP35H
TINSE0144SJZZ
Ba
sic Ope
ration
Setting the clock
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display when the power is on:
Press the CLOCK button.
The time display will appear for about 3 seconds.
Press the CLOCK button.
The time display will appear for about 3 seconds.
Note:
The "CLOCK" or time will flash when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.
The "CLOCK" or time will flash when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from the beginning. If the time is flash-
ing, step 2 (for selecting the 24-hour or 12-hour display) will be
skipped.
Perform "Setting the clock" from the beginning. If the time is flash-
ing, step 2 (for selecting the 24-hour or 12-hour display) will be
skipped.
To change the 24-hour or 12-hour display:
1
Press the CLOCK button and within 3 seconds, press the
MEMORY button.
MEMORY button.
2
Within 30 seconds, press the PRESET ( or ) button to
select 24-hour or 12-hour display and then press the MEM-
ORY button.
select 24-hour or 12-hour display and then press the MEM-
ORY button.
"0:00"
The 24-hour display will appear.
(0:00
-
23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 26 for details.]
has been reset. [Refer to "Clearing all the memory (reset)" on
page 26 for details.]
3
Within 30 seconds, press the PRESET ( or ) button to
adjust the hour and then press the MEMORY button.
adjust the hour and then press the MEMORY button.
! Press the PRESET ( or ) button once to advance the time
by 1 hour. Hold it down to advance continuously.
! When the 12-hour display is selected, "AM" will change au-
tomatically to "PM".
4
Within 30 seconds, press the PRESET ( or ) button to
adjust the minutes and then press the MEMORY button.
adjust the minutes and then press the MEMORY button.
! Press the PRESET ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.
! The hour will not advance even if minutes advance from "59"
to "00".
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 26 for details.]
memory (reset)" on page 26 for details.]
2
Perform "Setting the clock" from the beginning.
3
Click on the first or last page to see other XL-MP35H (serv.man2) service manuals if exist.