Read Sharp XL-MP10H User Guide / Operation Manual online
05/3/23
XL-MP10H(E)1.fm
9
TINSEA034SJZZ
XL-MP10H
Prepar
ation for
Use
"
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
the AC power lead of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
"
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Remote control
"
Battery installation
Precautions for battery use:
!
Replace all old batteries with new ones at the same time.
!
Do not mix old and new batteries.
!
Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
of time. This will prevent potential damage due to battery leakage.
Caution:
!
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
!
Installing the batteries incorrectly may cause the unit to malfunction.
Battery removal:
Remove the battery cover. Push each battery toward the battery
terminal and take them out.
Remove the battery cover. Push each battery toward the battery
terminal and take them out.
Notes concerning use:
!
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic.
operation becomes erratic.
!
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
sensor on the unit with a soft cloth.
!
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
operation. Change the lighting or the direction of the unit.
!
Keep the remote control away from moisture, heat, shock, and
vibrations.
vibrations.
"
Test of the remote control
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
Use 2 "AA" size batteries (UM/SUM-3, R06, HP-7 or similar).
Batteries are not included.
Batteries are not included.
1
Remove the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment.
the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
3
Replace the cover.
Check the remote control after
checking all the connections (see
pages 8 - 9).
Point the remote control directly at
the remote sensor on the unit.
The remote control can be used
within the range shown:
Press the ON/STAND-BY button.
Does the power turn on? Now, you
can enjoy music.
checking all the connections (see
pages 8 - 9).
Point the remote control directly at
the remote sensor on the unit.
The remote control can be used
within the range shown:
Press the ON/STAND-BY button.
Does the power turn on? Now, you
can enjoy music.
0.2 m - 6 m
(8" -20')
(8" -20')
Remote sensor
2
Click on the first or last page to see other XL-MP10H service manuals if exist.