Read Sharp XL-MP10H User Guide / Operation Manual online
05/3/23
XL-MP10H(E)1.fm
8
TINSEA034SJZZ
XL-MP10H
Prepar
ation for
Use
System connections
"
Aerial connection
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Position the FM aerial wire and rotate the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a shelf, or attach it to a
stand or a wall.
Notes:
!
Placing the aerial on the unit or near the AC power lead may
cause noise pickup. Place the aerial away from the unit for better
reception.
cause noise pickup. Place the aerial away from the unit for better
reception.
!
Do not connect the attached FM aerial to an external aerial as
this may cause trouble.
this may cause trouble.
Installing the AM loop aerial:
"
Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
plain wire to the plus (+) terminal.
Caution:
Placing the speaker system:
There is no distinction between the right and the left speakers.
There is no distinction between the right and the left speakers.
Right speaker
Left speaker
Wall socket
(AC 230 - 240 V, 50 Hz)
(AC 230 - 240 V, 50 Hz)
AM loop aerial
FM aerial
Make sure to unplug the AC power lead
before making any connections.
before making any connections.
Plain
White line
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
!
Do not let the bare speaker wires touch each
other.
other.
!
Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
more, as lower impedance speakers can damage
the unit.
!
Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
The right speaker is the one on the right side
when you face the unit.
Incorrect
Click on the first or last page to see other XL-MP10H service manuals if exist.