XL-MP10H - Sharp Audio User Guide / Operation Manual. Page 21

Read Sharp XL-MP10H User Guide / Operation Manual online

05/3/23
XL-MP10H(E)3.fm
21
TINSEA034SJZZ
XL-MP10H
Tape
 Recordi
n
g
Recording on a cassette tape
Before recording:
!
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
!
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
!
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
!
For recording, use only normal tapes. Do not use metal or
CrO  tapes.
!
Do not use C-120 tapes or poor-quality tapes, as they may cause
malfunctions.
"
Recording from a disc  
Erase-prevention tab of cassette tapes:
!
When recording on a cassette tape, 
make sure that the erase-prevention 
tabs are not removed. Cassettes have 
removable tabs that prevent acciden-
tal recording or erasing.
!
To protect the recorded sound, re-
move the tab after recording. Cover 
the tab hole with adhesive tape to 
record on the tape without the tab.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD DISC" appears on
the display.
When operating with the remote control, press the CD button.
3
Load the desired disc.
4
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be 
performed.
5
Press the   button.
6
Press the   button, which also
engages the   button.
7
Press the   button again to cancel the pause mode.
8
Press the 
 ( ) button to start recording.
Side A
Tab for 
side B
Tab for 
side A
6
Page of 28
Display

Click on the first or last page to see other XL-MP10H service manuals if exist.