Read Sharp XL-MP10H User Guide / Operation Manual online
05/3/23
XL-MP10H(E)2.fm
19
TINSEA034SJZZ
XL-MP10H
Radio
Listening to the memorised station
"
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead disconnection.
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead disconnection.
"
To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
select the desired station.
To select a preset station with the direct number buttons:
Press the corresponding number ("0" - "+10").
Press the corresponding number ("0" - "+10").
Example:
To select 28, press "+10", "+10" and "8".
To select 28, press "+10", "+10" and "8".
"
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset
memory scan)
memory scan)
"
To clear a memorised station
"
To erase entire preset memory
1
Perform steps 1 - 3 in "Listening to the radio" on page 18.
2
Press the MEMORY/SET (MEMO-
RY) button to enter the preset tun-
ing saving mode.
RY) button to enter the preset tun-
ing saving mode.
3
Within 5 seconds, press the PRE-
SET ( or ) button to select the
preset channel number.
SET ( or ) button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 5 seconds, press the MEM-
ORY/SET (MEMORY) button to
store that station in memory.
ORY/SET (MEMORY) button to
store that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
1
Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
tion is located.
1
Recall the memorised station.
2
Whilst it is displayed, press the
MEMORY/SET (MEMORY) button.
MEMORY/SET (MEMORY) button.
3
Within 5 seconds, press the CLEAR
button on the remote control.
button on the remote control.
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Whilst pressing down the MEMORY/SET button and the PRE-
SET button, press the ON/STAND-BY button until "TUCL" ap-
pears.
SET button, press the ON/STAND-BY button until "TUCL" ap-
pears.
5
Click on the first or last page to see other XL-MP10H service manuals if exist.